Yes, you can double insulation layers to effectively increase your total R-value. Stacking or layering insulation adds thermal resistance, but to get the full benefits without losing performance, you must use the right materials and avoid compressing the insulation.
By doubling the insulation layers in your loft, you increase its R-value, which in turn reduces its U-value (lower U-value is better). This results in better insulation and improved energy efficiency for your living space.
Achieving an R-30 insulation value in a 2x6 wall (which provides a standard 5.5-inch cavity) requires combining high-density cavity insulation with exterior continuous insulation (such as rigid foam boards) to prevent thermal bridging.
Thermal Resistance: R-21 polyiso boards offer higher thermal resistance compared to R-19, which makes them more effective at reducing heat transfer in colder climates.
R-30 insulation thickness varies by material, typically ranging from 8.25 to 10 inches for fiberglass batts and up to 10 to 12 inches for blown-in loose-fill. This thickness allows it to meet the strict thermal resistance standards required for attics and cathedral ceilings.
Mice are curious and always searching for safe, snug, and warm nesting sites. Attics filled with blown-in insulation provide an excellent option–from the mice's point of view. As long as there is a ready food source. Mice are omnivorous and will eat and chew on almost anything including wood and electrical wires.
What time of year is Insulation cheapest?
Blown-In Insulation: Costs about $1.00 to $2.80 per square foot, making it slightly more expensive than rolled insulation. However, blown-in insulation is better suited for filling irregular or hard-to-reach spaces, such as existing walls or tight attic corners.
Yes, insulation is tax-deductible in the form of a federal tax credit, specifically the Energy Efficient Home Improvement Credit (Section 25C). You can claim 30% of the cost of insulation and air sealing materials, up to a maximum annual credit of $𝟏,𝟐𝟎𝟎.
Foam insulation is a common target because it's easy for them to chew through. The material offers little resistance, allowing mice to create tunnels or nests within the insulation. But mice aren't just interested in chewing for the sake of it—they're also drawn to the warmth and shelter insulation provides.
It's recommended to leave an air gap insulation of at least 25mm or 1 inch for the walls and ceilings. This should be enough to allow for ventilation and prevent moisture buildup. The same rule may be applied when using foil insulation. On roofs, the air gap should be larger, typically around 50mm or 2 inches.
Because spray foam can trap moisture, hide the condition of the roof, make it difficult for surveyors to inspect, which means risks like timber decay, dry rot, and not forgetting increased fire risk. If you've got it or you're buying a property that does, this is something you need to know upfront.
Upgrading to R60 attic insulation is highly beneficial if you live in a cold climate or want to maximize home comfort. However, due to diminishing returns, upgrading from an already solid R38 or R49 to R60 won't drastically lower your utility bills.
The largest source of heat loss in a typical house is uncontrolled air leakage (drafts), accounting for up to 38% of lost heat. Warm air escapes through hidden cracks and gaps, while the following structural areas are the primary culprits for escaping warmth:
Open-cell spray foam needs 3–5 inches for walls and 6–10 inches for attics and ceilings. The exact thickness depends on the R-value you need to achieve, your climate zone, and the application area. For R30: Use 4.6 inches of closed-cell foam or 8.1 inches of open-cell foam.
Closed cell spray foam is rigid once set. It is a better thermal insulator and was previously sold to stabilise failing roofs. But if it has been used inappropriately or installed poorly, it might put stress on timbers, restrict air circulation and put them at risk of decaying.
Unfaced insulation is great for new construction, remodels, walls, floors, ceilings, basements, attics and crawlspaces. It's best used for interior wall applications that do not face the outside and also in rooms that don't need moisture control, like living rooms, dining rooms and studies.
The healthiest, non-toxic insulation for your home is natural sheep's wool or hemp insulation. These materials contain no chemical binders or formaldehyde, actively regulate indoor humidity to prevent mold, and do not off-gas.
The cost to insulate a new build with spray foam typically ranges from $14,100 to $30,500 for an average 2,000 to 2,500 sq. ft. home.
Have HVAC Prices Gone Up in 2026? Yes HVAC prices have steadily increased over the past few years, and 2026 is no exception. These increases are affecting everything from entry-level systems to high-efficiency units, making it more expensive than ever to install or replace HVAC systems.
Home insulation doesn't have an “expiration date,” and the material doesn't “go bad” after a certain number of years have passed. Ultimately, the condition of the insulation and its performance are more important factors than age when deciding whether to upgrade or replace insulation.
The Amish control mice through non-chemical, self-sustaining methods, relying on active trapping, natural scent repellents, and structural exclusion. Rather than using commercial poisons, they focus on physical barriers and natural predators to keep rodent populations in check.
Potential problems with spray foam insulation
reduce air circulation and ventilation within a roof space. lead to dampness and condensation on the underside of a roof because it forms an air barrier and stops moisture from escaping. place timber-framed roofs at risk of decay.
While traditional fiberglass and cellulose are soft and easy for mice to tunnel through, true "rodent-proof insulation" relies on dense, unpalatable materials like mineral wool, combined with solid physical barriers to block entry points.