Can you copy Master Lock keys?

Author: Fae Fahey  |  Last update: Sunday, June 5, 2022

A: Master Lock does not provide keys directly to consumers; however, you may take one of your keys to a local hardware store, home center or locksmith where they can cut duplicate keys. Please note that not every store will have the appropriate key blanks available.

Does Home Depot make copies of Master Lock keys?

A: Yes, The Home Depot stocks many Master Lock key way replacement blanks. Please visit your local store to identify and duplicate your original.

How do you get a Master Lock key?

If you know the key number, a Master Lock distributor can order a duplicate cut key direct from Master Lock. If you do not have your original key, a locksmith or a hardware store may be able to impression your lock and create a new key.

What keys Cannot be duplicated?

But not every lock can be broken and not every key is for duplication. There are certain keys that cannot be duplicated. They are called Do not duplicate (DND) keys.
...
These are non-duplicable keys:
  • Transponder Key.
  • Laser Cut Car Key.
  • VAT Key.
  • Abloy keys.
  • Tubular Keys.
  • Internal Cut Keys.
  • Four-Sided Key.

Can you duplicate keys that say do not duplicate?

The truth is there's no law regarding “do not duplicate” keys. The engraved message found on many business keys is not legally binding – it's just a recommendation. Though many chain hardware stores, such as Ace, may refuse to cut a copy of these keys, a locksmith can easily duplicate them.

[141] How To Duplicate A Lock Buster Key

What does a restricted key look like?

What Does a Restricted Key Look Like? A restricted key can take different shapes and forms depending on the level of restriction. Most of these are only able to be copied by the lock manufacturer. These keys usually require some level of ID card identification in order to be copied.

How do you unlock a Master Lock without the key?

1. Break the padlock with bolt cutters
  1. Step 1: Choose a suitable pair of bolt cutters. ...
  2. Step 2: Fix the lock with pliers or a vise. ...
  3. Step 3: Apply indirect force on the cutters. ...
  4. Step 1: Check the direction of the lock. ...
  5. Step 2: Smooth the side where the shackle will fall off. ...
  6. Step 3: Open the padlock.

Can a locksmith open a Master Lock?

The best way to unlock a master lock is to call a professional emergency locksmith service to do the job for you. It might be a bit expensive compared to some of the other methods, but you will save a lot of time in the process. A professional locksmith will be able to make you a spare key for the lock.

How do you pick a Master Lock without a key?

The easiest way to pick a Master Lock is by raking it. This is done by first tensioning the core and using a lock pick to bump all of the pins to the shear line. Master Locks can also be picked with a variety of makeshift tools including paperclips, bobby pins, soda cans, and even chicken bones.

How much is it to copy a key at Walmart?

Walmart does provide key copying and cutting services in 2022. Customers can cut their own keys and make duplicates in-store at the MinuteKey kiosks. The price for each key can range from $2 to $6 per key. Like all reputable locksmiths, Walmart will not copy “Do No Duplicate Keys.”

Do Lowes cut keys?

If you find yourself needing a spare key for the dog walker or babysitter, shop for a key blank and then bring it to the hardware department to create your new key. We can duplicate house keys and even cut spare car keys.

Can Lowes copy car keys?

The kiosks enable customers to safely store a “digital copy” of their keys in the cloud and create a spare copy at their local Lowe's in under 30 seconds. The new kiosks will be able to copy car keys, both with transponder chips and those without.

Can bolt cutters cut a Master Lock?

Try bolt cutters.

This will not work on most master locks, as they are made of case hardened steel.

How do you pick a Master Lock with a paperclip?

How to Pick a Master Lock with a Paperclip Step-by-Step Process
  1. Step 1: Prepare tools. ...
  2. Step 2: Reshape the paperclip. ...
  3. Step 3: Determine the rotation direction. ...
  4. Step 4: Determine the position of the pins. ...
  5. Step 5: Push the pins up. ...
  6. Step 6: Continue with the remaining pins.

How do you break a Master Lock without a bolt cutter?

By far the easiest way to cut a padlock is with bolt cutters.
...
How to Cut a Padlock Without Bolt Cutters (9 Quick & Easy Methods...
  1. Use an Angle Grinder. ...
  2. Use a Dremel. ...
  3. Use a Propane Torch and Hacksaw. ...
  4. Use a Cutting Torch. ...
  5. Use a Hammer. ...
  6. Use a Shim. ...
  7. Lock Picking.

Do master locks use the same key?

In a Master Keyed system, a master key opens all the locks in the system although each lock also has its own unique key.

Is there a key that can open any lock?

Master key: The master key can open all locks you have in your residential or commercial property.

Can you make a copy of an InstaKey?

InstaKey eliminates unauthorized key duplication because our key blanks are not available to local hardware stores or locksmiths, so a copy can't be made.

Can a restricted key be cut?

A restricted key can only be cut at the locksmith who owns the restricted key system and only by an authorised signatory on record, thus allowing complete control over the key system and the number of keys distributed.

What is a Primus key?

About Primus Keys

Schlage Primus is a unique, patented type of key that features additional side “cuts” or “millings” that make the lock extremely difficult to manipulate and open. These side cuts work in conjunction with a “side bar” located inside the Schlage Primus lock cylinder.

What will cut through a Master Lock?

All that is required is that you get hold of a bolt cutter to cut the master lock. If you do not have a bolt cutter, you can get that or leave the task for professionals to do. Please note that cutting a master lock with a bolt cutter might not work on most master locks because they are made of case-hardened steel.

Can you drill out a Master Lock?

Yes, it is possible to drill out a master lock. However, it won't work on all of them. Use a drill and a 1/4 inch drill bit and drill through the center of the mechanism. That way, it destroys the locking mechanism.

What is the hardest lock to cut?

What is the hardest lock to cut?
  • Abloy PL 362 Shrouded Hardened Steel Padlock. ...
  • Abus 83/55mm Rock Steel Padlock CS. ...
  • Abus Granit Plus 37RK/80. ...
  • Stanley laminated steel padlock. ...
  • Stanley 24/7 all-weather padlock (solid brass) ...
  • Master Lock High Security Pro Series Padlock. ...
  • Secure self-storage solution.

Does Harbor Freight make keys?

Other Stores That Do Not Offer Key Copying Services:

Harbor Freight. Magic Mart. Walgreens. Target.

Does AutoZone make copies of car keys?

No appointments are necessary and we offer keys for a wide range of vehicles including Chrysler Ford GM Nissan Toyota and more. The keys are duplicated accurately and the cuts are digitally verified before you leave the store. So why stress out about having only one car key when AutoZone is key.

Previous article
What is the most secure type of door lock?
Next article
What paint will stick to enamel?