Dilute ¼ cup of Pine-Sol® in one gallon of warm water. Dampen a sponge in the mixture, wring out so it's just damp to wipe away grease, grime and dirt. Optional: Scrub stubborn messes or stains with full strength Pine-Sol®, using a sponge or soft cloth. Finish by rinsing with water and wipe kitchen cabinets dry.
For safe, effective use, avoid using Pine-Sol® on unsealed, waxed, oiled or visibly worn wood.
On wood surfaces, do not allow puddles of product to remain. Pine-Sol® is not recommended for use on marble, aluminum, or unsealed, waxed, oiled or visibly worn wood.
Water (with a pH of 7) and dish soap (with a pH between 7 and 8) are always good options. The best cleaner, the one that is less likely to do damage to the wood is good old-fashioned elbow grease. Applied with a damp cloth, elbow grease should be effective at removing dirt and dust and even oil and grease build-up.
Vinegar is the go-to natural cleaner when faced greasy cabinets. Mix a 50/50 solution of vinegar and warm water and pour it into a spray bottle. Mist on cabinets, let sit for a minute or two and then wipe clean with a soft cloth.
Mix 1 cup of water, 1 teaspoon of white toothpaste, and 2 tablespoons of baking soda. Use your finger or a spoon to mix it well. Dip a sponge in the mixture and scrub down your cabinets. Rinse with a damp cloth until all residue is gone.
Create a cleaning solution with 1-part baking soda, 2 parts warm water and the lemon juice. Add the solution to a spray bottle and spray the liquid onto the kitchen cabinets. Leave for 2-3 minutes, allowing the baking soda to work its magic. Use the soft sponge to gently scrub the grease away.
Use 50% water and 50% distilled vinegar for a streak-free look. If your kitchen glass cabinet has wooden mullions, then do not spray the distilled vinegar directly on the surface. Instead, spray onto a cloth and gently wipe.
Deep cleaning:
Place about 1/2 teaspoon of dish soap or oil soap wood cleaner on the scouring sponge. Wet the sponge slightly and gently scrub the cabinet allowing it to form a lather. Wipe with a slightly wet cloth with fresh water in it. Then dry it with a microfiber cloth.
Mix a cup of white vinegar with a cup of water. This mild cleaning solution is perfect for everyday use on wooden cabinets. It won't warp the wood or take off the finish. If you dislike cleaning with vinegar, you can use a light soap solution instead.
You can use Pine-Sol® cleaners on hard, nonporous surfaces, including floors, sinks, counters, stoves, bathtubs, shower stalls, tile and more!
Pine-Sol® Cleaners are concentrated formulas that you can dilute for most jobs. For general cleaning, a 24 oz. bottle gives you 12 gallons of cleaning power! Add water to the formula yourself and save.
What is this? Pine-Sol is more acidic than Fabuloso, which gives it an advantage in breaking down stubborn stains and complex messes caused by grease. Pine-Sol Original is the only liquid cleaning solution that disinfects.
Dilute ¼ cup of Pine-Sol® in one gallon of warm water. Dampen a sponge in the mixture, wring out so it's just damp to wipe away grease, grime and dirt. Optional: Scrub stubborn messes or stains with full strength Pine-Sol®, using a sponge or soft cloth. Finish by rinsing with water and wipe kitchen cabinets dry.
Mix ⅛ cup of Pine-Sol® in ½ gallon of water. Pour the mixture in a spray bottle or soak it up with a sponge. Coat the sink with the mixture, wiping it down with a cloth, sponge or paper towel. If you're pressed for time, simply sponge down the sink with Pine-Sol® full strength.
A: We do not recommend using Pine-Sol® on dishes. It is not approved by the EPA to be used on food-contact surfaces.
Dawn dish soap is famous for being an excellent degreaser, and this simple tip might be the best way to clean wooden cabinets. It is also mild enough that it won't ruin your wood cabinets or their finish. You can even use dish detergent as the best way to clean painted kitchen cabinets, too.
The sticky residue found on your kitchen cupboards is usually caused by cooking grease and dirt, but it may also be the residues left by some cleaners. No matter what its source, a sticky residue is unappealing and damaging to your kitchen cabinets.
Murphy® Oil Soap gets deep into grime to break up dirt particles and it's safe to use on wood products like cabinets.
Mix equal parts of white vinegar and hot water in a 5-gallon plastic bucket. Add a few drops of olive oil to the mixture. The vinegar and hot water help to disinfect your cabinets, while removing grease and grime. The olive oil provides a subtle shine.
For removing very stubborn stains caused by grease and grime, use a small amount of rubbing alcohol and a clean, dry cloth and rub the polyurethane surface thoroughly. Removing Stains. – To rid your polyurethane countertop of stains, rub the surface using a microfiber sponge.
DO tackle tough spots with baking soda.
In a small bowl, mix one part baking soda with two parts water. Use a clean, dry cloth to dab the paste onto the dirty spots. Let the paste sit for a few minutes, and then wipe it away with a damp cloth, gently rubbing until the grunge is gone.
Lysol can be hard to find online and in-stores, but Pine-Sol seems to still be available at most retailers. Compared to Lysol, Pine-Sol has a longer contact time (Lysol's ranges from 2 minutes to 5 minutes) but will still effectively help you to limit your contact with the virus.
Pine-Sol vs Lysol
Lysol works just like Pine-Sol and will get rid of bacteria, fungi, mold, viruses, etc. after getting into contact with the surface for at least ten minutes. However, it may not be as effective if there are organic materials.