Transfer the slats or entire blind to your bath tub. Plug the drain and fill the tub with cold water until it covers the blind or slats. Add 2 or 3 cups of liquid bleach to the cold water as you fill the tub. Let the slats or blind soak in the bleach solution for about 10 minutes.
Run cold water into the bath, add 2-3 cups of bleach. Place the blind in the bath, ensuring all the slats are fully immersed in the water. Leave to soak for 10 minutes. Wipe down every slat, front and back, using a cloth.
Take the blinds off the window and soak them in the bleach solution for about 10 minutes. Stay safe by opening your windows and running a fan to ensure good air circulation in your work area. NOTE: Follow any cleaning directions that come with your blinds.
Use a rubber sponge, also known as a dry sponge (found at hardware and paint stores), to remove dust and residue from both fabric and vinyl blinds. Simply wipe the dry sponge firmly across the blinds. 5. For spot cleaning, spray an all-purpose cleaner onto a clean dry cloth and wipe the soiled area of the blind.
Cleaning Vinyl Blinds
Fill the tub with warm, soapy water, and let the blinds soak in the solution for a few minutes. Next, go over each each slat with a sponge. Rinse with water to remove any lingering residue, and hang them from the shower rod to dry.
For filthy blinds, the best approach is to take them down and clean them in the bathtub. First, fill the tub with warm water and add a few drops of mild dish soap. Then, submerge the blinds and, while they're soaking, wipe each slat with a non-abrasive sponge. After an hour, rinse the blinds and dry thoroughly.
To deep clean: For very dirty, sticky plastic blinds, save yourself the headache and remove them from the window and place them in a bathtub filled with warm water and a squeeze of dish soap. Let them soak for an hour. Rinse and hang them outside until they're completely dry.
Fill a bathtub with cold water and 2 or 3 cups of bleach. Completely submerge the yellowing blinds in the bath. Soak the blinds in the bath for 10 minutes. After soaking, wipe each slat with a cloth.
Deep-clean if necessary
Take the blinds off the window and place them in a bathtub with warm water, a few generous squirts of dish soap, and a cup of baking soda (a natural stain fighter). Let the blinds soak for about an hour and then rinse with warm water. Finish them off by wiping away any excess dirt or dust.
How do I clean fabric window blinds? Both methods of professional blind cleaning… UltraSonics & Injection/Extraction Blind Cleaning, are FULLY capable of cleaning fabric blinds & window shades cleaning too.
Keeping your mini-blinds clean with Clorox® Triple Action Dust Wipes is a great excuse to spy on the neighbors. Here's how: Fully extend the blinds. Close the blinds loosely so the top of the slats are facing you.
If your blinds are white, it may be helpful to add a little bit of bleach to a bucket or bath full of clean warm water, and allowing the blind to soak in it for thirty minutes before rinsing and hanging out to dry. You need to do more than 'spring clean'.
Here are some material-specific tips: Wooden Blinds – Excess moisture is wood's worst enemy, so avoid getting wooden blinds wet. To dust them, use a clean, soft cloth, a feather duster or a vacuum brush. To put more life into the wood, use a cleaner made specifically for wood, such as lemon oil.
If the blinds are white or light cream in colour, use a diluted solution of water and bleach. 4-6 drops of bleach per cup of water should do. Wipe on with a damp sponge or cloth. If the mildew is bad this may take a few applications to kill the mildew and reduce the stain.
Both vertical and horizontal blinds have a tendency to accumulate dust, lint and other debris, resulting in discoloration over time. When your blinds are originally white, this generally means they turn a murky yellowish color that is unattractive and undermines the appearance of an otherwise clean room.
Dryer sheets are great for eliminating static cling in your laundry, but they can also be used to clean and remove static electricity on everything from louvered and Venetian blinds to TV screens. Just wipe down the surface with the dryer sheet, then throw it away when it becomes dirty.
To remove dust from vinyl vanes, wipe down the slats with a microfiber cloth. For tougher grime or dirt, you can wipe the vanes with soapy water and a microfiber cloth, or allow them to soak in a tub. Abrasive cleaners may scratch the surface of your blinds, so use caution.
Combine 1 part rubbing alcohol with 5 parts water if an oily film remains on the slats. Wash the slats with alcohol solution, using the same method as you did with the detergent. Wipe the blinds dry after cleaning to prevent water spots.
The easiest way to clean roller blinds
For regular cleaning without having to remove your blind, all you need to do is roll your blind down fully and use your vacuum's upholstery tool to gently remove dust and dirt. For a deeper clean, wipe in a downward motion from top to bottom using a clean, damp cloth afterwards.
Cleaning mould on your roller blinds with detergent and water: you can remove mould by using a cloth, clear mould detergent and lukewarm water. If this doesn't do the job, try using lemon juice with salt and leave to dry before wiping down thoroughly.
Place the blind in a bathtub filled with warm soapy water and allow to soak. Use a mild laundry detergent rather than soap or dishwashing liquid as this will be the kindest to your blind's fabric. After an hour, check your blind for stains. Examine both sides and spot-clean where necessary using a cloth or sponge.
If the blinds are really dirty, consider covering your face
For squeaky clean blinds, put down the Windex.
Steam cleaning thoroughly cleans blinds. A damp cloth will work for touch-up cleaning. For a more thorough cleaning, a steam cleaning unit can be used. Hot steamer vapors not only lift dust, but also kill dust mites and mold.