While copper-based algaecides are very useful for ensuring that algae growth is prevented, using too much can actually spike up the copper levels in your pool to make it reactive enough to your chlorine to turn your pool water green!
Pools can immediately turn green after shocking or adding chlorine when they have metals like copper or iron in the water. These metals oxidize when exposed to high levels of chlorine, which makes the pool water turn green. Metals in the water are caused by some algaecides and using well water.
Although, if you overdo the shock treatment, you risk getting green hair from chlorine due to the excess chlorine oxidizing the copper in the water. You can execute a shock treatment with a few different types of pool shock, just be mindful of how much you're using.
You cannot overshock a swimming pool or add too much. Adding too much shock or overshocking your pool will kill off algae. The negative of adding too much shock is it will upset the chemical balance of your pool.
The free chlorine levels might be low.
But be careful—adding too much chlorine in pool water can cause those metals to oxidize and turn the pool a different shade of green.
It's pretty tough to over-shock your pool; shocking your pool two days in a row with the proper dosage for your pool volume shouldn't be a problem – and in fact, is sometimes even needed to rid your pool of algae and other contaminants.
A pool filter should be run for a minimum of 6 hours after shocking a swimming pool. This is to allow the filter to clean the water and give the shock enough time to fully mix with the pool water. Running the filter after shocking for 24 hours to 7 days is necessary if the pool has a large amount of algae.
Add Pool Water Clarifier
After your pool water has circulated and your shock has dissipated, it's time to add your clarifier. Clarifier helps bind tiny particles into bigger particles that your filter can capture.
To double shock, you will need to add 2 pounds for every 10,000 gallons of water. For instance, if you pool is 20,000 gallons, you will add 4 pounds of shock. Green or Dark Green Pool Water: This means there's a medium amount of algae in your water and you'll need to triple shock your pool.
Pool water turns green because of algae in the water. Algae can grow rapidly, particularly when it's warm like Summer, which is why it can surprise you overnight. This generally comes down to an imbalance or lack of chlorine in the water.
Brown pool water is often caused by metals (iron) becoming oxidized in the pool water. If you shocked your pool water and it turned brown you probably have metals. Oxidized iron usually turns a brown or rusty color in the water.
How Often Should I Shock My Pool? Shocking your pool regularly will help to keep the water clean and free of contaminants. You should aim to shock your pool about once a week, with the additional shock after heavy use. Some tell-tale signs that your pool needs to be shocked are cloudy, foamy, green, or odourous water.
Despite how it sounds shocking a pool has nothing to do with electricity or with revealing something completely unexpected. Shocking is the process of adding chemicals (usually chlorine) to your pool to: break apart chloramines, also known as combined chlorine. quickly raise your chlorine level.
Green pool water is often caused by the presence of algae in your pool. Algae blooms can appear when your pool has a low Free Chlorine. Exposure to high heat, heavy rain or poor circulation, without the use of a preventative algaecide, also increase your risk of developing pool algae.
While shocking and adding algaecide is effective in getting rid of algae, it should not be done together. This is because when you mix chlorine and algaecide together, it renders both of them useless. Hence, you should first shock the pool and wait for the chlorine levels to fall below 5 PPM.
Baking Soda and Green, Blue, or Yellow Algae
You'll need to use an algaecide to kill the algae and superchlorinate your pool to clear the water. After this treatment, test your pH and alkalinity and add baking soda to raise alkalinity to at least 100 ppm and pH to between 7.2 and 7.8.
The pool turned green from copper, not algae
Think of the Statue of Liberty. It is made of copper, and has turned green over time through oxidation.
Mustard Algae is a form of green algae that is highly resistant to chlorine. Special treatments must be used to eliminate it. Mustard algae is yellowish-green in color and often looks like dirt or sand on the bottom or sides of the pool. It brushes away very easily, but returns very quickly.
Backwash only as needed. Brush the pool vigorously, several times after shocking the pool. Do not use a solar blanket until chlorine and pH level are normal. If chlorine level drops to zero within 24 hours, Repeat the shock treatment.
ADD POOL CLARIFIER
The change in your pool water colour means that you have successfully eliminated the algae and can now clean it out of your pool. If your water is still green, wait another 24 hours and redo the steps from Days 1 and 2.
Algaecide should be used after each shock treatment, so it has a better chance to support your chlorine as it works its magic. Be sure to shock your pool first, then when the chlorine levels of your pool return to normal, add the correct amount of algaecide to several places around your pool while your pump is running.
It's not a good idea to use pool shock at the same time as clarifier. Some clarifiers are polymer based and the shock can act to break up the polymer causing the clarifier to be ineffective. It's best to shock your pool before and wait a day or two before adding clarifier.