It is very hard to remove all of a solid stain with a deck stain stripper. Once you remove as much as you can, let the wood dry and then power sand to remove the remaining solid stain. After you are satisfied with the results it is important to apply a wood deck brightener.
Removal is Not Always Necessary
While it's never a bad idea to sand and strip old stain, doing so can certainly be time-consuming and challenging. In some cases, you can get away with leaving the previous coat as it is, as long as you perform the other necessary preparation steps, such as sanding and power washing.
Cocoa is made up of some of the world's toughest stains. It is essentially made from chocolate, which by itself is already a big culprit for dark stains. Apart from this, the drink also proves to be a tough stain to remove because it has the strong combination of proteins, fat, and sugar.
The right solution varies depending on several factors, but staining over a previous coat of stain is perfectly viable under the right conditions. If you're planning to apply a fresh coat of deck stain on top of an older one, here are some tips to make the process go smoothly.
Hirshfield's offers quality deck care products including: Cabot, Arborcoat®, Ready Seal, Storm System and ProLuxe Sikkens. These products provide varying degrees of UV protection as well as offers a wide selection of colors. Never use solid siding stain or paint on a deck. In this application, these will usually peel.
For harder to remove solid stains longer dwell times may be necessary. Once the solid stain begins to break loose from the wood surface, use a pressure washer at 1500-3000 psi to remove as much as the solid stain as possible. Reapply the stain stripper and repeat the process if stubborn areas remain. Rinse thoroughly.
A solid stain is, essentially, a paint. Both are films that sit on the surface of a substrate. A penetrating stain differs from a solid stain entirely in that the product actually absorbs into the wood. To determine which product is right for a given project, there are a number of different things to consider.
Solid stains provide a thick, colored film that can be made to match or coordinate with the colors of your home siding. Just like paint, they must be applied in two coats, and they typically retain their strength and color for 4-5 years.
Solid wood stains: Just like regular paint, solid stains hide the grain of the wood, and the best should last three to five years on a deck, the longest of the three types of stains.
The hotter the surface of the wood, the more quickly the stain will dry. If it dries too quickly, then it simply won't have time to penetrate into the wood, leaving it on the surface to form a film and, you guessed it, eventually peel.
Unfortunately for everyone, some stains are permanent. They simply become part of the fabric. Continued attempts to remove them will cause dye loss or fabric damage, known as chafing or fraying. Many stains are removed by the dry cleaning machine and require no additional effort from the cleaner.
The most common technique for stain removal is rubber cup polish called Motor Driven Coronal Polish: It is a slow-speed hand piece with attached rubber cup and polishing paste.
Curry Stain
Turmeric in curry powder is the key culprit that can cause your soft furnishing to be permanently stained if curry gravy is spilled.
While all deck stains provide water protection, the more pigment a stain has the more UV protection it provides. A clear stain would provide almost zero UV protection while a solid stain would provide the most protection from the sun.
Solid stain is in the middle ground between paint and regular or semi-transparent stain in that it seeps into wood more than paint, but not as much as regular stain. Solid stain creates a solid-coloured coating on wood without completely obscuring the underlying grain.
The new stain you are applying over the old stain should be compatible. For instance, if it's an oil-based stain, apply another oil-based stain. If it's a water-based stain, apply another water-based stain. Incompatible stains can lead to poor adhesion or blotchy and uneven finish.
Solid color stain works as a top coat finishes and can prevent the wood from becoming chipped and flaked. Also, solid color stain doesn't actually contain the anti-fungal agent. As a result, they may not protect wooden surface or items against water as effectively as the semi-transparent stains do.
While solid stain can resist fading from the sun, it won't resist eventual cracking, peeling, or blistering. This is especially true if the wood is often wet or in direct sunlight. No matter how good the solid stain or the painter, solid stain will eventually peel and need recoated.
Water based polyurethane is best to use when you want a clear finish over stained wood or a painted surface. It's great for weathered wood finishes and gray wood stains too!
The difference between a solid stain and paint
Whereas paint sits on top of a surface, solid stain absorbs into it. This means that instead of peeling like paint does, solid stain fades with age. As a result, solid colour stains tend to look better than paint does as time goes on.
Semi-solid stains are a better choice for decks that have seen their share of cookouts. You'll still see some grain, but you'll hide more of the wear and tear your deck has endured. Solid wood stains are for deck surfaces that have a lot of imperfections, or you just want to add a splash of color.
Apply solid stains in thin coats and semi-transparent stains or clear sealers in even thinner coats. This prevents puddles that don't soak into the wood and cause the stain to flake off when dry. Whatever type of stain you use, apply two coats to ensure there are no missed spots and to get a more uniform finish.
What are Differences between Solid Stain and Paint? Paint is more expensive and is more time consuming to apply on a surface.
Stain is typically less costly than paint and comes in fewer colors and options. It is typically used for wood projects but there are some options available for concrete as well.
While you can stain over paint, realize that you are creating a unique look, not an authentic stained wood-grain look. For that, first strip off all of the paint, then apply the stain. Paint with greater gloss means that the surface is less porous. The stain will more easily slide off, resulting in a lighter color.