In an effort to dislodge whatever is clogging the toilet, many homeowners get overzealous and thrust too hard downward into the toilet with their plunger. A hard thrust downward can break the wax seal between the toilet and the floor, causing a leak. And a really hard thrust could even crack the bowl.
One very common cause of wax ring problems is loose toilets. If the toilet is not firmly mounted, or gets loose to the point where it rocks a bit, it can cause the wax ring to lose its seal. When installed, a wax ring is compressed to fit the flange and the toilet, creating the seal.
Don't use excessive force when plunging a clog. Also, keep in mind that you shouldn't use too much pressure because it can damage the drain line connection, which will lead to further problems eventually.
Apply the mineral spirits with a rag and scrub gently to remove the wax residue. Always use care with mineral spirits as it is flammable. If you don't have mineral spirits on hand, check in your garage for a bug and tar remover or Goof Off Heavy Duty.
Signs of a Faulty Wax Ring. A faulty wax ring, or one that is going bad, may produce any number of telltale signs. These include leaks, bad smells, or a wobbly toilet.
In theory, the wax ring “should” last the lifetime of the toilet, or certainly 20 to 30 years. We come across situations all the time, however, where wax rings are in need of replacing well short of this scenario.
It requires no maintenance and can last 30 or more years, often as long as the toilet itself. But sometimes wax rings can dry out, crumble, and fail prematurely. When that happens, they need to be replaced.
Sprinkle 1 cup of borax into your toilet bowl before you go to bed. Get it on the sides of the bowl, under the rim, and inside the bowl itself. In the morning, scrub quickly with a brush, and flush. The borax loosens up everything you can see and not see, making scrub time much faster.
Place the Wax Ring and Toilet
Do not be tempted to stack up two wax rings because this setup tends to leak. Installing a flange extender or using an extra-thick wax ring will work much better in the long run.
Attempting to force a clog through a toilet with a plunger can often make the problem worse. Instead, create a seal and slowly push down on the plunger before pulling it back sharply. The suction can help pull the clog back up toward the bowl, breaking the blockage and allowing gravity to take over.
Is it bad to plunge a shower drain? While it won't necessarily cause damage, you should not plunge a shower drain. It will only cause the clog to travel further down your plumbing.
Ideally, no more than five or 10 minutes. One plumber told us that if plunging goes on any longer, it's time to try a toilet snake or call an expert.
The only-when-flushed toilet leak could be caused by loose mounting bolts or a worn-out wax gasket while the all-the-time leak could be caused by a loose water supply line connection, a problematic water shutoff valve, or a faulty seal between the toilet tank and its base.
You should always consider replacing the toilet supply when replacing the wax seal. If toilet is caulked to the finished floor of the bathroom, score the caulking all the way around the toilet base with a razor knife.
$90-$120 is a good ballpark.
If you are having other plumbing work done, they might do it cheaper, and if they have a large travel fee, you may pay closer to $150. Unless there is a problem, it should take them under a half hour, whereas, it might take a novice 1.5-2 hours.
Bacteria, fungi, mold, and mildew among other things love to grow in the standing water of our toilets and are one cause of the dark ring around the edge of the toilet water (this is also one reason you should never let your pets drink from the toilet).
Hard Water Mineral Buildup. If you regularly notice brown water inside your toilet bowl, it could be due to hard water mineral buildup. Hard water contains high levels of minerals like magnesium, calcium, and iron that can build up over time inside your pipes and fixtures.
Instead, these unsightly brown stains are caused by minerals found in your water supply. If you live in a hard water area, your water supply will contain minerals such as iron, manganese, and calcium. When a toilet isn't cleaned regularly enough, these minerals leave behind deposits that slowly build up over time.
So instead of purchasing those expensive fizzies or abrasive toilet bowl cleaners, head to the fridge and let the carbonation of Coke work its magic on filthy rings, lime buildup, and water stains. Because Coca-Cola contains carbonic, citric, and phosphoric acids, it's great for tough stains and dissolving rust.
Best for Rings: Pumice Stone Toilet Cleaner – Amazon and Walmart. For stubborn toilet rings, try the Pumice Stone Toilet Cleaner. You can use this product to scrub off stains and rings before selecting a cleaning solution.
Wax-free toilet seals are made out of a heavy duty rubber, so they're flexible enough to shimmy into the flange without smearing a wax ring. Wax-free seals can also be reused. As long as they're still attached to the bowl in good condition, you can reinstall the toilet without replacing the seal.
In most parts of the United States, it is a requirement of building code to caulk around toilet bases. This could apply to both new builds and remodeling, though as regulations vary from one state to another it's a good idea to check local statutes.
🚽 Caulking Prevents Water Contamination
It could be water splashing out of a bathtub, mop water, water from a shower and even misguided potty training from your young boys who seem to miss the toilet bowl every single time! Without caulk around the toilet base, water can get under there and sit for a long time.