It will also clean most stains on fiberglass, teak, and sails. I love this stuff. OxiClean does not ruin clothes when used properly. Like most “oxygen bleaches” it is simply a
SAFE TO USE AS OFTEN AS NEEDED to maintain a water-repellent shield against soap scum, hard water stains, and more. This shower cleaning spray works on most shower and tub surfaces including tile, fiberglass, acrylic, plastic, glass, and mirrors.
Be careful not to use any abrasives on the fiberglass, such as scouring pads, steel wool or gritty cleaning solutions. “Soft Scrub” may be used sparingly on soap scum buildup. “Lime-Away” may be used for hard water mineral deposits.
OxiClean's manufacturer suggests that it should not be used on the following fabrics: wool, wool blends, silk, silk blends, leather, or on fabrics labeled dry clean only.
OxiClean contains several ingredients, but the important one for boosting and brightening laundry is sodium percarbonate — basically, dry hydrogen peroxide plus washing soda (also called sodium carbonate, which is very similar to but not exactly baking soda).
WARNING: Injurious to eyes. Harmful if swallowed. Contains sodium percarbonate and sodium carbonate. Avoid powder or solution contact with eyes and prolonged skin contact (wear gloves).
Start with a mild cleaner, like dishwashing liquid.
Bleach can also damage fiberglass, so verify that it's not an active ingredient in your mild cleaner. You can also make a homemade cleaner easily by combining vinegar with regular dish detergent. This cleaner may work particularly well in showers.
Before you give up on trying to scrub away the stains, try the cleaning process Home Depot recommends for tough stains on fiberglass: Smear on a paste of baking soda and water, and cover that with a towel soaked in vinegar. Wait one hour, then rub with a cloth or sponge. Rinse. Wipe again with a clean microfiber cloth.
Best Natural: Vinegar and Baking Soda
You can use vinegar and baking soda to clean and deodorize a fiberglass tub. Start by adding 1 part white distilled vinegar and 1 part water to a spray bottle. Next, spray the shower, allow it to sit for ten minutes, and then wipe it clean with a microfiber cloth.
That's right: Grab your dish soap and a broom, and you might be as pleasantly surprised as we were to learn that Dawn is apparently just as effective at banishing bathtub scum as it is at removing all that grime and grease from your dishes and pans.
One popular way to clean a fiberglass shower is with baking soda. You can combine baking soda with clean water to form a sort of paste, which you can apply directly on any stained areas of your shower. When you're done, you will want to rinse your shower several times with warm water.
Mold and mildew love damp conditions, and it doesn't take long for visible stains and musty odors to develop on the fabric of your favorite clothing. OxiClean is a popular choice for tackling mold on clothes. It's oxygen bleach, which is gentler than chlorine bleach but still effective for killing mold and mildew.
Vinegar wash
White vinegar is acidic enough to dissolve mold, mildew, grease and buildup—but it won't hurt the fiberglass. Good for stains, smells and schmears. Create a solution of 1 part vinegar to 3 parts water.
Fiberglass stain remover
In a bowl, add a couple of tablespoons of baking soda. Slowly add a small amount of water and mix until you make a thick paste. Using a cloth, rub the paste on fiberglass to remove stains. Rinse area with water.
Fiberglass and FRP (Fiber Reinforced Plastic) – For these materials, we recommend Bar Keepers Friend Cleanser. Simply wet the hull, make a paste using our product and a small amount of water, and then use a damp sponge to spread the cleanser evenly.
The solution is a no-brainer. It's just equal parts of Dawn® dishwashing soap and distilled white vinegar. You mix together Dawn® and vinegar in a spray bottle. Then you spray the mixture on the surfaces and wipe it off with soft cloth or sponge.
⚠️ DO NOT USE BLEACH ON FIBERGLASS ⚠️ Here's. why! It can strip the top, protective layer off of the. fiberglass creating hard to remove stains.
For surfaces that may come in contact with food a potable water rinse is required. Clorox Disinfecting Wipes will not harm most surfaces, including acrylic, fiberglass and vinyl. Not recommended for use on unpainted wood.
CLR is great for cleaning calcium, limescale, rust, salt, mineral deposits, oxidation, algae and fibreglass/gel coat yellowing from boat surfaces and components.
You can add OxiClean to a regular wash cycle, or use it to soak stained clothing for up to 6 hours before washing. Clean your bathroom and kitchen. OxiClean can remove soap scum from tile and grease grime from grout and kitchen appliances. Sanitize kids' toys, sports gear, and pet supplies.
Spray directly into the spot or stain until saturated. Let stand for 5 minutes or up to a week depending on the severity of the stain. For fabrics that are prone to color change, do not let stand longer than 5 minutes. Do not treat garment while wearing.
Oxygen bleach Oxygen bleach (like OxiClean) is an alternative to chlorine bleach, and it's safe for many fabrics. You can use it to remove stains on colors, as well as whites. It doesn't contain scary chemicals and it won't ruin most fabrics—though you should avoid using it on silk or leather.