The easiest way to pick a Master Lock is by raking it. This is done by first tensioning the core and using a lock pick to bump all of the pins to the shear line. Master Locks can also be picked with a variety of makeshift tools including paperclips, bobby pins, soda cans, and even chicken bones.
Pick-resistant locks have an extra set of tumblers or locking apparatus so that, in effect, the key has to do two things at once. Because of their resistance to manipulation, these locks are also resistant to key bumping. One of the most popular pick-resistant locks is the Medeco.
Breaking a Master Lock Is Insanely Easy
Turns out, any Master Lock can easily be broken into with just a small hammer. As this video illustrates, all you need to do is tap the side of a Master Lock with a hammer to get it to open, no key, no combination required.
Try bolt cutters.
This will not work on most master locks, as they are made of case hardened steel.
Jiggle the screwdriver while thrusting it in and out of the lock. Slide the blade of the screwdriver back and forth slowly. At the same time, work the handle of the around at different angles to engage as many pins as possible.
In conclusion, every lock can be lockpicked. However, keep in mind most you will encounter (90%) are low security, and that with training you will be able to open 90% of the locks you see within a minute, usually within fifteen seconds, and that you will be able to open 95% of the locks without five.
To pick a lock with a bobby pin, first bend open a bobby pin until it makes a 90-degree angle, and remove the rubber piece on the straight end. Make a slight bend at the tip of the straight end. Now, take a second bobby pin and bend the closed end to one side so it forms a 90-degree angle.
It may be possible to order products that can be opened by an existing Master Lock key. Take your existing key and lock to a hardware store (Ace, True Value, Do it Best, etc.), locksmith or other outlet that sells Master Lock products. Ask them to order the product with the same key number that is on your key.
The easiest way to pick a Master Lock is by raking it. This is done by first tensioning the core and using a lock pick to bump all of the pins to the shear line. Master Locks can also be picked with a variety of makeshift tools including paperclips, bobby pins, soda cans, and even chicken bones.
Master key: The master key can open all locks you have in your residential or commercial property.
Master Lock is one of the leading padlock brands, and this model is one of your best options for an all-purpose combination lock. It has a 2-inch-wide lock body and a 1-inch hardened steel shackle that resists cutting for added security.
ABUS Granit™: one of the world's most secure padlocks with a tensile resistance of over six tonnes. Granit locks have a tensile resistance of over six tonnes, making it almost impossible for attackers to release the shackle from the lock body by force.
One of the most common (and easiest to pick) locks is the pin-and-tumbler, which is a type of cylinder lock. Cylinder locks are used in most deadbolts. When picking a pin-and-tumbler lock, put the tension wrench in the keyhole and turn it as if it was a key.
The Stronghold SS100CS padlock is the world's strongest padlock. The first padlock to ever achieve LPCB Level SR4 (Loss Prevention Certification Board) - which is their highest rating. These massive super heavyweight padlocks are the newest addition to the Squire Stronghold range.
Lockpicking allows locks to be bypassed with relatively little evidence, but to truly leave the scene undisturbed, steps must be taken to resecure a lock. Most common locks you will come across today can be easily relocked after they are opened without a key.
Examine the handle and trim on the interior side of the door. There may be a small pinhole holding the handle in place. Insert a straightened paper clip into this hole and apply pressure to release the interior handle. Insert the pin straight through the lock cylinder to reach the lock's release mechanism.