Use Scrubbing Bubbles® Bathroom Disinfectant Bathroom Grime Fighter Aerosol to go to work, deep down, in between bathroom tiles and remove 100% of soap scum. Just spray on the foam – use an old toothbrush if any grime or mildew really gives you a hard time – then wipe away.
Plus, it's safe for most surfaces in the bathroom, including tiles and grout. Our top pick, Scrubbing Bubbles Disinfectant Bathroom Grime Fighter Spray, does away with soap scum and dirt. It also gets rid of 99.9% of viruses and bacteria, earning it our best overall rating for its great cleaning power.
Scrubbing Bubbles can cause discoloration to some plastics, so while it can be used on the exterior of the toilet and the seat, you're better off sticking with the Windex Multi Surface Cleaner for those parts.
For stubborn shower stains, soap scum and grime, mix one cup of warm water, two cups of white vinegar and one teaspoon of a vegetable-based dishwashing soap in a spray bottle. Spray the solution on the shower walls, let it work for 15 minutes and use a sponge to scrub off scum and grime.
Chemical cleaners, such as, Tilex, Soft Scrub, Scrubbing Bubbles, or ammonia products will nearly always result in your tile surfaces' grout becoming very discolored. If you do choose to utilize a cleaner, make sure that it's neutral in pH level to ensure it doesn't damage your grout.
For stained or discolored grout, mix two parts baking soda with one part vinegar. And if you have coarse or fragile tiles, mix two parts baking soda with one part hydrogen peroxide. If desired, you can also use a commercial grout cleaner. Use a grout brush or old toothbrush to apply the paste to the grout lines.
Scrubbing Bubbles Mega Shower Foamer not only cleans shower tile but also multiple other bathroom surfaces. This cleaner works on ceramic and porcelain tile to remove soap scum, dirt, grime, and calcium and lime deposits.
Shower Tile
Begin by pre-treating the surfaces with a water-vinegar solution. Then use a baking soda paste and scrub with a stiff bristle brush. Once you've loosened up the dirt on the tiles, you can use scouring pads to scrub the surface clean.
The automatic shower cleaner was likely discontinued because of manufacturing defects. Unfortunately, it's a real challenge to create a cleaning product that sits in the shower, holds and sprays liquid, and that is waterproof to protect its electronics and battery. There's just too much humidity in a typical bathroom.
Spray 15 inches from surface to be cleaned. Allow foam to penetrate dirt and soap scum. For tough jobs, let stand for several minutes before wiping.
Eye contact: Severe eye irritation. Skin contact: Moderately irritating to the skin. Inhalation: May be irritating to nose, throat, and respiratory tract. Ingestion: May be irritating to mouth, throat and stomach .
SCRUBBING BUBBLES DISINFECTANT BATHROOM CLEANER
Use on tubs, showers, shower doors, basins, glazed ceramic tile, sinks, counters, stainless steel, chrome, fixtures, fiberglass, vinyl and glazed porcelain surfaces. Spot test for all other hard, non-porous surfaces.
For regular cleaning, just sweep away debris, wipe with clean water, and thoroughly dry. For deep cleaning, use a pH-neutral or mildly alkaline detergent. Use a nylon or plastic scrubber, if needed.
Combine vinegar and baking soda in a paste that you'll apply to the tiles. Let it sit for a while to break down soap scum or limestone and then rinse it off.
Dawn dish soap and vinegar – Mix equal parts of vinegar and blue Dawn dish soap into a spray bottle. Run the shower for a few minutes on hot to heat up the shower space. Spray to coat the surface of the shower walls evenly with the mixture. Let sit for 5 minutes then use a damp cleaning rag to wipe away.
Porcelain. Porcelain is one of the most popular choices for tiling shares due to its versatility and affordability. You can find glazed, unpolished, and textured porcelain tiles. For easy cleaning, we recommend a large glazed tile that makes this already durable material stronger and less porous.
While there are a few cleaners that can be used on all surfaces, there are some that you want to avoid because they are too abrasive for the surfaces in the bathroom. Products that claim that they have scrubbing bubbles in them to lift mildew, mold or dirt off of surfaces should be avoided.
Porcelain tiles tend to be harder, more resilient and more stain-resistant than ceramic tiles. They are one of the easiest types of tile to maintain but their surface can eventually be eroded by the regular use of corrosive chemicals such as ammonia, bleach or acids that can also damage the grout and loosen the tiles.
You'll also want to steer clear of cleaners containing dyes or coloring if you're cleaning unglazed tiles. Steel wool is also a major no-no when cleaning porcelain, as small fragments can become lodged in the tile and cause rust stains over time. Lastly, avoid hard-bristled scrub brushes or anything else abrasive.
Choosing natural cleaners, baking soda, vinegar and even hot water are great options for getting rid of dirt, mildew and germs.
Turn Up the Steam
Steam is a great cleaner and disinfectant. After every shower, turn on the hot water and let the steam loosen all the dirt and grime on the shower walls and door. Rinse everything with hot water and you're done!