Dilute ¼ cup of Pine-Sol® in one gallon of warm water. Dampen a sponge in the mixture, wring out so it's just damp to wipe away grease, grime and dirt. Optional: Scrub stubborn messes or stains with full strength Pine-Sol®, using a sponge or soft cloth. Finish by rinsing with water and wipe kitchen cabinets dry.
Pine-Sol is an effective cleaner as well as a deodorizer and disinfectant that has been around since 1929, and is suitable for wood if used properly.
On wood surfaces, do not allow puddles of product to remain. Pine-Sol® is not recommended for use on marble, aluminum, or unsealed, waxed, oiled or visibly worn wood.
Water (with a pH of 7) and dish soap (with a pH between 7 and 8) are always good options. The best cleaner, the one that is less likely to do damage to the wood is good old-fashioned elbow grease. Applied with a damp cloth, elbow grease should be effective at removing dirt and dust and even oil and grease build-up.
Learn how to clean countertops and make kitchen cleaning easier with these cleaning tips. Pine-Sol cleans all kinds of counter tops and surfaces while disinfecting. Dilute ¼ cup of Pine-Sol® in one gallon of warm water. Dip a sponge in the mixture to wipe grease and grime away.
Mix ⅛ cup of Pine-Sol® in ½ gallon of water. Pour the mixture in a spray bottle or soak it up with a sponge. Coat the sink with the mixture, wiping it down with a cloth, sponge or paper towel. If you're pressed for time, simply sponge down the sink with Pine-Sol® full strength.
Pine-Sol® Cleaners are concentrated formulas that you can dilute for most jobs. For general cleaning, a 24 oz. bottle gives you 12 gallons of cleaning power! Add water to the formula yourself and save.
Vinegar is the go-to natural cleaner when faced greasy cabinets. Mix a 50/50 solution of vinegar and warm water and pour it into a spray bottle. Mist on cabinets, let sit for a minute or two and then wipe clean with a soft cloth.
Mix 1 cup of water, 1 teaspoon of white toothpaste, and 2 tablespoons of baking soda. Use your finger or a spoon to mix it well. Dip a sponge in the mixture and scrub down your cabinets. Rinse with a damp cloth until all residue is gone.
Dawn dish soap is famous for being an excellent degreaser, and this simple tip might be the best way to clean wooden cabinets. It is also mild enough that it won't ruin your wood cabinets or their finish. You can even use dish detergent as the best way to clean painted kitchen cabinets, too.
Steps For An Expert Clean
Mix ¼ cup of Pine-Sol® for each gallon of water. Dampen a soft sponge, cloth or mop with the mixture to wipe down the surface. Scrub stubborn spots with a gentle scrub brush or mop. Use Pine-Sol® full-strength if needed, following up with a water rinse.
What is this? Pine-Sol is more acidic than Fabuloso, which gives it an advantage in breaking down stubborn stains and complex messes caused by grease. Pine-Sol Original is the only liquid cleaning solution that disinfects.
A: Yes. Original Pine-Sol® Multi-Surface Cleaner is registered with the EPA as a disinfectant when used as directed full strength. When used according to the instructions on the product, it kills 99.9% of germs and household bacteria on hard, nonporous surfaces.
Finally, when used and applied the right way, Pine Sol doesn't leave behind any residue that will leave you with an unsightly hardwood floor surface. Wax and oil-based cleaners, on the other hand, leave behind a hazy residual substance.
While Pine SOL can be diluted for lighter applications, Pine Glo has to be used as is in all cases. Pine Glo loses a good part of its cleaning and disinfecting capabilities once it is diluted which is not the case with Pine SOL.
The sticky residue found on your kitchen cupboards is usually caused by cooking grease and dirt, but it may also be the residues left by some cleaners. No matter what its source, a sticky residue is unappealing and damaging to your kitchen cabinets.
Mix a cup of white vinegar with a cup of water. This mild cleaning solution is perfect for everyday use on wooden cabinets. It won't warp the wood or take off the finish. If you dislike cleaning with vinegar, you can use a light soap solution instead.
Murphy® Oil Soap gets deep into grime to break up dirt particles and it's safe to use on wood products like cabinets.
Deep cleaning:
Place about 1/2 teaspoon of dish soap or oil soap wood cleaner on the scouring sponge. Wet the sponge slightly and gently scrub the cabinet allowing it to form a lather. Wipe with a slightly wet cloth with fresh water in it. Then dry it with a microfiber cloth.
Use 50% water and 50% distilled vinegar for a streak-free look. If your kitchen glass cabinet has wooden mullions, then do not spray the distilled vinegar directly on the surface. Instead, spray onto a cloth and gently wipe.
According to its FAQs page, Pine-Sol doesn't recommend mixing its products with any other household cleaners. The proper way to use Pine-Sol is to mix ¼ cup per gallon of warm water.
Dilute ¼ cup of Pine-Sol® in a gallon of warm water. Sponge down the inside fridge walls with the solution. You may need a full-strength dose to handle those hard-to-clean areas. Follow up by thoroughly rinsing any surface that might come into contact with food or food containers.
Pine-Sol vs Lysol
Lysol works just like Pine-Sol and will get rid of bacteria, fungi, mold, viruses, etc. after getting into contact with the surface for at least ten minutes. However, it may not be as effective if there are organic materials.
Most people won't have any noticeable reaction to modern Pine SOL containing glycolic acid if it comes in contact with skin. In rarer cases, it can cause skin irritation. It is also quite safe in case you accidentally ingest it. Seek medical help if you start to experience an allergic reaction.