The Delicate cycle is great for washing lightweight, lightly soiled items like sheer fabrics, silk blouses and synthetic fabrics. It's also helpful for washing items prone to wrinkling.
The quick wash cycle typically includes a shortened wash cycle and a high-speed spin cycle, so it helps quicken drying time. Because of the high spin cycle, avoid quick wash for delicate items like silks, lingerie, woolens, and anything with embellishments.
Cotton Cycle: 1.5 hours to 4 hours. Synthetic Cycle: 2.5 hours to 3 hours. Delicates Cycle: 45 minutes to 1.5 hours.
It's recommended to use the delicate wash cycle on your appliance when cleaning these and other items such as undergarments and delicate fabrics like lace and rayon. Use the normal wash cycle when cleaning moderately soiled cottons, linens and other mixed fabrics.
Generally, cold wash cycles are fine for all clothes including delicates and colored clothing. Warm water should be used for clothes that are more soiled and for whites, and hot water for very soiled clothing or items that need to be kept clean, like underwear and towels.
Wash heavier items, like towels, seperately from lighter weight clothes to prevent abrasion and damage to finer fabrics. For the same reason, separate clothing with zippers and buttons from knits and lingerie. If an item sheds lint, wash it seperately from microfiber, corduroy or other fabrics that attract lint.
A delicate wash cycle (or “delicates”) is the washing machine equivalent to handwashing. The difference between the hand wash vs delicate cycle is that this setting uses cold water with low agitation with a slow spin and is the shortest, gentlest cleaning cycle.
Wash clothes on the shortest cycle (e.g. "quick wash") that's practical for your needs. This means less water, heated to a lower temperature and a shorter spin cycle to save water and energy. Bonus: a quick cycle will cause less damage to your clothes over time so help them last longer.
The delicate wash in a washing machine is specifically designed to protect fragile fabrics from damage during the wash cycle. This setting uses lower agitation and gentler spin speeds, making it ideal for materials like silk, lace, wool, and thin fabrics that require extra care.
By using less energy, a quick wash will also save you money. But a quick wash isn't the best option if you need to wash stained clothes. The temperature is too low to lift a stain properly, so always use a full wash for more heavily soiled garments.
Washers and dryers are some of the largest energy users. Save by doing the following: Try to do laundry on weekends when there are no Peak hours. On weekdays, run washers and dryers during Off-Peak hours: before 3 p.m. or after 7 p.m.
Avoid Overdrying: Excessive drying can damage your clothes and strain the dryer. Remove clothes promptly when they are dry or slightly damp to prevent unnecessary wear and energy waste. Overdrying can lead to shrinking, wrinkling, and increased electricity consumption.
Choose Your Cycle Carefully
“A good general rule of thumb is to stick to cold and delicate cycles,” says LaLonde. “Cold cycles are the way to go to prevent shrinking. Most fabrics are much more susceptible to shrinking when exposed to high heats.”
As a result, any residue of the spot cleaning agent will remain in the garment and may eventually develop a visible 'ring'. If you have a garment with a 'spot clean only' label, bring it to us for dry cleaning and we would be happy to discuss the options and risks of different cleaning methods.
“Delicate” or “Hand Wash” machine settings when used with a gentle laundry detergent can protect and prolong the life of your delicate items.
If your washer leaves clothes soaked, you may also need to check your cycle settings. Hand Wash or Delicate settings often use slower spin speeds to avoid harming fragile fabrics, leaving a standard wash load soaking wet.
Choose the Right Wash Cycle
A regular cycle is best for sturdy and dirty clothes, while the permanent press setting is fine for the average load. Use the delicate cycle for lacy and loosely woven fabrics. Use hot water for white loads, warm water for the average load, and cold water for bright colors.
The dye in darker clothes can easily seep into lighter clothes during the laundry process, that's why it's best to wash dark-colored garments (black, grey, dark-brown, dark-green, olive, purple, indigo, navy blue, dark-red, crimson, and so on) in a separate batch.
First, always make sure to turn your jeans inside out. This simple (but usually neglected) step protects the outer color from fading and minimizes direct contact with chemicals and detergents. This step is especially important for dark-wash and black jeans that are more prone to color loss or transfer.
A second rinse bath produces a much cleaner final product by rinsing off the soil that is redeposited during the first rinse. Often times, the second rinse tank includes a heated facility water inlet which constantly overflows the second rinse tank with small amounts of water to ensure water cleanliness.
Delicates/Wool
As the name implies, a delicates or wool cycle is typically the most gentle setting, using low agitation, cool water and a low spin speed to prevent your fragile clothes from becoming damaged.
The cheapest setting on a washing machine is usually the Eco wash program, also called the Saver wash. By using lower temperatures and less water, it reduces energy and water consumption, saving you money in the long run.