Just as natural dish soap helps break down dirt, grease, and food that may be stuck on dishes and utensils, it can help break down what's in your toilet bowl.
Homemade Toilet Bowl Cleaner With Dawn & Vinegar
The grease-fighting power of Dawn is unmatched. Add that to the acidic nature of vinegar, and you have a powerful 1-2 combo for this easy recipe. In an old dish soap bottle, combine 1 cup vinegar with 1 cup Dawn.
To remove tough stains, add the baking soda and vinegar mix to your toilet and then allow the solution to sit in the bowl for up to 30 minutes. During that time, the chemical reaction between the sodium bicarbonate and vinegar will work to eat away at those stubborn hard water stains.
Stir together 1 and 2/3 cups of baking soda, 1/2 cup of dish soap and 1/2 of water. Use a fork to stir the solution until all the lumps are dissolved. Pour the solution into a squirt bottle and shake thoroughly. An empty dish soap bottle works well.
“Vinegar is a good cleaner because it's acidic, but when you add dishwashing liquid/dish soap to it (which is a base or neutral) - you neutralise the vinegar. You take away the very thing that makes it work well. “The dishwashing liquid works that well on its own. Adding the vinegar is a pointless step.”
Pour 2 cups Dawn and 2 cups vinegar into a glass bowl. Stir; heat 4 minutes in the microwave; remove and stir again. Shake well to mix the solution. Use as needed on shower doors.
Citric acid
More importantly, it's probably even more effective than vinegar for getting rid of that brown stain in the toilet. Simply pour a kettle of almost boiling water into the bowl, follow up with 250ml of citric acid, and leave it for some hours – preferably overnight. The next day, scrub and flush.
If the clog still seems to be intact, start over at step 1 and repeat the process a couple of times. For extra-stubborn clogs, you can let the fizz mixture sit overnight or combine this method with plunging.
Pour equal parts of vinegar and Dawn into a spray bottle. Gently shake, then spray liberally onto the surface to be cleaned. I have found the best results is when I use it to clean chrome shower and sink fixtures. After spraying on the fixture, rub and wipe it with a microfiber cloth to avoid scratching.
Try this: Swish a cup of vinegar around in the toilet bowl using a toilet brush, then add a cup of baking soda, followed by an additional cup of vinegar.
You may start to notice improvement in as little as 15 minutes, though that is the minimum time your dish soap should sit in the toilet. Again, we prefer to let it sit overnight whenever possible. Once enough time has passed, go ahead and flush your toilet.
You can clean toilet stains with a toilet brush, baking soda, and white vinegar. Household cleaning ingredients like Borax or a wet pumice stone can also scrub away tough mineral stains.
Cleaning with a mixture of baking soda and vinegar in the bathroom can work really well. To clean your toilet with vinegar, pour a cup of vinegar in the toilet bowl and let sit overnight. The next morning, sprinkle a little baking soda into the bowl, scrub, and then flush clean.
"The biggest don't when it comes to toilet tanks is bleach—do not use bleach or products containing bleach inside the tank, as it can corrode the internal parts of your toilet. If you are aiming to remove tough stains from the tank, I also recommend white vinegar diluted with water."
Pour one cup of baking soda into the clogged toilet, and then chase it with the hot water/vinegar mixture. Leave the volcano mix to do its job, checking in about 30 minutes. In most cases the clog will have come apart, and a simple flush with send it all down the drain. Plus your toilet bowl will be cleaner!
Vinegar will not damage your toilet in any way if it's left in your toilet overnight. Regardless of your toilet's material, the vinegar is not strong enough to damage the toilet or the toilet's plumbing. So, you can leave the vinegar in your toilets overnight without worry.
Green or brown stains are a sign of lime buildup. It happens because of the evaporation of hard water that leaves behind mineral deposits.
Pour a cup of vinegar into the bowl, then mix it around with a toilet brush. Add a cup of baking soda to the coated areas and immediately follow up by adding another cup of vinegar. Wait about 10 minutes to allow the baking soda and vinegar to interact, creating that effective fizzing action.
The combination of dish soap and vinegar is highly effective for a few different reasons. They're both excellent at breaking down tough grease and grime, but vinegar alone will simply run off of most surfaces, and dish soap is too thick to use on its own.
“When you add peroxide to dish soap, it breaks down into oxygen and water. The soapy water then traps that oxygen, creating bubbles, making your dish soap extra foamy.” To harness the full power of peroxide and dish soap, there are a few basic guidelines to follow.