Remove grease from vinyl floors with Dawn dish soap
Dawn is great at cutting through grease in dirty pans, but it also does the same thing on vinyl floors. If the floor around your stove is especially hard to clean, fill a bucket with a gallon of warm water, and include a few drops of Dawn, per Apartment Therapy.
Commercial vinyl floor cleaners are available, but you can make a simple, effective cleaner for vinyl floors by mixing apple cider vinegar with water. The vinegar's acidity removes dirt without leaving a soapy film. Mix one cup of cider vinegar with a gallon of hot water.
Clean off general surface dirt with vinegar. White vinegar or apple cider vinegar (without the mother) cuts through grime. It's an excellent option to spiff up your vinyl floor without chemicals. Vinegar is also great for removing any floor stickiness.
Never use a detergent that is abrasive. Vinegar or “mop and shine” products may leave a film on your film, rather than give you that shiny floor that you seek. Never use a wax polish. Never use an abrasive scrubbing tool on your floor.
Add a bit of baking soda to your regular floor cleaner to help keep the vinyl fresh, smooth, and shiny. Applying a small amount of WD-40 lubricant is a safe way to remove any scratches or scuffs without damaging the vinyl. You can also use a bit of jojoba oil to gently polish vinyl floors.
Dish soap cleaner: Use a few drops of liquid dish soap in a bucket of warm water. This mixture is great for vinyl floors in a kitchen, which can accumulate crud quickly each day. Vinegar cleaner: For anywhere in the house, use diluted vinegar to clean vinyl plank floors.
DO NOT use All-Purpose or Multi-Purpose cleaners, detergents, abrasive cleaners or “mop and shine” type products (such as Bleach, Pine-Sol, Clorox Soft Scrub, Fabuloso, Rejuvenate, Mop & Glo, Mr. Clean, Murphy's Oil Soap and similar, unapproved cleaners), as they will dull the finish and sheen of the flooring material.
Swiffer wet cloths are designed to be used on most floor surfaces, such as: vinyl.
Pine-Sol Multi-Surface Cleaner – Yes, Pine Sol on vinyl floors is a fine option; however, use sparingly with water. Do not oversaturate your vinyl floors with too much water, use just enough to disinfect the floors.
Distilled white vinegar is a natural degreaser, disinfectant, and cleaner that is safe to use on all kinds of surfaces, including vinyl floors. The acidic compounds in white vinegar break down buildup and remove dirt without harming your floor's finish.
You can use regular dish soap and warm water to clean your vinyl floors. For tougher stains and dirt, you can also add a little vinegar into the solution.
Mop up dirty vinyl, linoleum, or tile floors.
You can mop these types of floors with a simple solution of one to two tablespoons of Dawn and a gallon of warm water. Your floor will look good in no time!
One essential tip for maintaining your luxury vinyl floor is not to mop too often. Once a week or twice a month is plenty.
Mr. Clean Multipurpose Cleaner cuts grease and removes grime. Use this antibacterial cleaner to clean dirt on linoleum as well as bathtubs, floors, tile, and toilets. It is safe for use on glass, laminate, plastic, rubber, tile, and vinyl surfaces.
When it comes to dropped cigarettes, hot pans or dishes, or curling irons, luxury vinyl will not hold up. This kind of extreme heat can and will damage these floors. It is also important not to attempt using a steam cleaner on these materials either to void the warranty and damage the floors.
To add shine to your vinyl floor, add a few drops of baby oil to the vinegar and water solution. For stains you can use a mixture of baking soda and water that is a natural way of cleaning. As far as commercial cleaners, there are many to choose from.
Sweep or vacuum regularly to remove dirt & grit that can scratch the floor and wipe up all spills promptly and thoroughly with a damp cloth or mop, washing with a mild detergent when needed. You can restore your floor's original gloss by vacuuming, washing & applying 2-3 coats of floor restoring polish.
Luxury vinyl planks (or tiles) are, in themselves, completely water-proof and cannot be damaged by exposure to moisture.
Let's start with the basics: touching the record surface is a big no-no. Our hands contain natural oils, grease, and dirt – none of which we want anywhere near our records. This grime builds up over time, compounding dust and dirt while also contributing to stylus wear. Always handle your records by the outer edge.