Yes, you can replace an R-22 compressor, but it is often not recommended. Because R-22 and the parts to service it are mostly obsolete, replacing the compressor requires overcoming several technical and financial hurdles.
Yes, you can physically install an R-410A compressor into an R-22 system, but it is not a simple swap and requires running the new compressor on R-22. Attempting to convert the entire system to R-410A is highly impractical and dangerous due to vastly different pressure ratings.
The $5,000 rule is a guideline to help homeowners decide whether to repair or replace their HVAC system. You multiply the age of your unit by the cost of the needed repair. If that number exceeds $5,000, replacing your HVAC system is often more cost-effective.
Freon MO99 is the gold standard for R-22 alternatives and was developed by the same scientists who engineered Freon R-22. The benefits of Freon MO99 include: Capacity — The ability of Freon MO99 to heat or cool a given space is closer to Freon R-22 than any other refrigerant on the market.
R-22 refrigerant typically costs between $𝟗𝟎 and $𝟐𝟓𝟎 per pound. Because R-22 has been phased out, the supply is dwindling, which causes prices to continuously climb.
A 30-pound cylinder of R-22 refrigerant is generally worth between $500 and $1,200 to purchase wholesale, and up to $2,400 to $4,500 if bought directly from a service company during a home repair.
R22 refrigerant is illegal to import and manufacturer in the U.S. But it's not illegal for anyone to buy R22 freon. And it's not illegal to sell it IF you have a license. As long as the stocks last, you will be able to continue purchasing R22 from specialized dealers and form your air conditioning company.
Yes, MO99 (also known as R-438A) is a direct, "no-oil-change" drop-in replacement for R-22. It is specifically engineered to replace R-22 in residential and commercial air conditioning, heat pumps, and refrigeration systems.
There are no refrigerants that can be safely or legally mixed directly into a system with R-22. Doing so can cause catastrophic compressor failure, severe pressure inconsistencies, and oil breakdown.
Trying to use R-454B in a system built for R22 or 410A can cause leaks, breakdowns, and even void your warranty. Even if it were technically possible, retrofitting usually ends up costing as much as replacing the system outright — but without the efficiency or reliability of a new unit.
The "two-foot rule" in HVAC is a duct design and installation guideline that requires a minimum of 24 inches of straight, uninterrupted space between branch take-offs (where air taps off the main trunk). It is also applied to spacing branches away from end caps, transitions, and the main plenum.
Many Amish homes are built with plenty of windows to help circulate the air and bring in the cooler overnight temperatures. They open the windows on the top floors to help the heat escape while the family retreats to the lower grounds within their homes for comfort.
The best time to buy a new HVAC system is during the off-peak seasons, particularly in winter months (December through February) and early fall (September through October).
January 1, 2025: Manufacturers stopped producing new R-410A residential split systems and heat pumps. Equipment manufactured before this date can still be sold and installed. January 1, 2026: The original deadline for installing R-410A split systems manufactured before 2025.
No, R22 and R-410A are not compatible. You should never mix them in the same system.
R-410A is currently being phased down rather than fully banned, with the production of new R-410A equipment already banned. The remaining supply will be gradually reduced by 85% through 2036.
A 30-pound cylinder of R-22 refrigerant is generally worth between $500 and $1,200 to purchase wholesale, and up to $2,400 to $4,500 if bought directly from a service company during a home repair.
A2L refrigerants, the new refrigerants for 2026, will replace R-410A in new systems. A lot about A2L refrigerants is explained in their name: The “A” means low toxicity. The “2L” is a safety classification, indicating it is mildly flammable.
R-22 refrigerant typically costs between $𝟗𝟎 and $𝟐𝟓𝟎 per pound. Because R-22 has been phased out, the supply is dwindling, which causes prices to continuously climb.
The "best" R22 replacement depends on whether you are doing a drop-in retrofit (using existing equipment) or upgrading the whole system. For retrofits, the top choices are R407C for maximum efficiency and R422D for easier compatibility. For long-term viability, replacing the system entirely with an R454B or R32 system is recommended.
No, you should never mix MO99 (R-438A) with R-22.
Freon™ 407C has been a popular R-22 replacement because of its properties, which include: Similar cooling capacity, energy efficiency, and pressures as R-22 in systems. An ability to be topped off after a leak, multiple times, with minimal impact on system performance.
Refrigerant can only be sold to technicians certified under the Section 608 or Section 609 technician certification programs, where individuals may only purchase refrigerant consistent with the appliances covered by their certification.
If you're interested in learning how to refill R22 in your air conditioner, it is important to know that this is not something a homeowner can do on their own. Due to complexity, safety concerns, training and licensing required we do not recommend doing this without having a trained professional onsite.