Many recommend a water-based acrylic primer, paint and top coat. Acrylic paint dries to provide the hard surface needed for heavy-use areas like countertops, while water-based acrylic paint cleans up with water and is low on odors.
Tip: Latex paint is recommended for laminate surface painting projects because of its durability and smooth finish.
A: Like most rules, there's always an exception, so YES, you can paint laminate furniture without sanding or priming IF you use the right kind of paint. You can skip the primer if you are painting laminate furniture with chalk paint.
Mod Podge + Acrylic Paint = No Prep, No Sanding Paint Formula that works on laminate, wood, metal – Almost ANYTHING!
And, with that final layer of topcoat dry, you've given a fresh new look to an old laminate countertop. The painted surface is durable, but not quite as resistant to water and scratches as the laminate, so be sure to wipe up spills quickly and avoid scratching the paint as much as possible.
Once the cabinets are primed, you can paint them with oil-based paints, acrylic paints or melamine paints. Melamine paints are specifically designed for painting laminate surfaces, as the moisture-resistant materials in the paint make them just right for the moisture and steam so prevalent in kitchens.
The best way to ensure paint on laminate lasts is to sand the surface and use a good bonding primer, followed by two layers of high-quality latex paint and a durable top coat – allowing each layer to dry thoroughly before adding the next.
For painting laminate furniture, you want to do at least 2 coats of primer and let them cure completely (overnight if you can!) in between coats. You can even sand in between coats for maximum adhesion. (Fancy words eh?) I used a smooth roller and rolled on 2 coats of primer and let it dry overnight.
The BIN shellac-based primer, Cover Stain primer, and clear shellac primer mentioned above all come in aerosol spray paint cans and are SO good at getting paint to stick to laminate cabinets or furniture.
Clean the laminate furniture with Krud Kutter to remove all of the dust and any grease or oil from the surface. Repair any scratches or chips in the laminate. Prime with a shellac based primer. Let primer dry before painting.
Don't paint a dirty surface—make sure you clean first. Don't skip sanding. Because laminate has a synthetic, glossy surface, sanding is especially important.
Painting laminate wasn't difficult, but I did find it more time-consuming than painting wood. To sum it up, the most important steps are to sand and prime all the surfaces before painting. If you were to skip those two steps, your paint would have nothing to adhere to and would most likely peel right off.
What happens if you paint laminate cabinets without using a primer first? The paint needs the primer to help it bind to the cabinets. Use a bonding primer, a stronger product than a regular primer, to ensure it sticks to the laminate. If you don't prime laminate candidates, the paint may quickly flake or peel.
Latex or water-based paint works well on laminate cabinets if you use a good primer. But before it fully cures, the paint remains sticky and may peel off easily if two painted surfaces bump against each other. With a water-based primer underneath. latex paints may take one to four weeks to cure.
Using chalk paint is a great solution for transforming basic laminate into an eye-catching piece that lasts! You've obviously heard about chalk paint, but there are a lot of misconceptions about it.
It's easy to skip the sanding step, because sanding is a drag… but it's especially important with laminate. Because it's often somewhat glossy-looking, and important to sand it down until the finish is very dull before priming. We recommend using 120 grit sandpaper for this.
Ideal Uses: Metal, Wicker, Concrete, Wood, Vinyl, Laminate, Plastic and, Glass.
Using 120-grit sandpaper, lightly sand the laminate surface in a circular motion. Don't worry if the furniture starts to look a little dull and less glossy, this is what you want to happen. Avoid sanding too much or you might tear up the laminate from the surface, or even make a hole.
If you want to make a big impact in your kitchen without a big investment, consider priming and painting your laminate countertops. Your local paint store can supply you with the best type of paint to use in this project. Many recommend a water-based acrylic primer, paint and top coat.
Go for a self-priming paint that's formulated for use on glossy, laminate surfaces. This cuts out the need for special primers, reducing both expense and time. Frenchic's Al Fresco range, Lazy Range and Trim Paint are the ideal solution.
Allow the furniture to dry for at least two hours between each coat. Let the newly-painted furniture cure for a week. You can re-attach any handles or knobs to the furniture once the final coat is dry, but avoid setting anything on the furniture until it's cured for a week to prevent peeling.
Both amplify the aesthetics of your kitchen and are practical because of their heat and moisture-resistant properties. While acrylic needs a little more maintenance to retain the gloss for a longer period of time, laminates are cost-effective and low maintenance.
You can use any type of acrylic you like for painting on wood. Take a look at our brilliant range of acrylic paints here if you are looking for some. Use a wide, flat paintbrush to apply the paint to the wood.
Can I use Mod Podge with paint? Absolutely – well mostly. You can use it with acrylic paint, and I highly recommend FolkArt Acrylic Paint as my brand of choice.