Wood cabinets are ideal for painting, but any surface that can be scuffed with sandpaper can be painted. Laminate cabinets require a special bonding primer. The laminate must be in good condition for best results. Choose a high-quality paint.
Yes, when done properly. Don't expect it to be a fast DIY project where you can just messily slap on some normal latex paint. We recommend using the proper paint (either a latex enamel or Urethane Trim Enamel Paint) as well as a proper primer.
Yes, it is possible to paint cabinets without sanding.
Don't Go Overboard on Sanding
You should sand cabinets before beginning your how to paint kitchen cabinet project to give the new paint a good surface to grip. But you don't need to sand to bare wood. If your cabinets have a factory finish, sand lightly with 120-grit sandpaper or a sanding sponge.
While oil-based paints make a case for themselves with their reputation for easy application and a long-lasting finish that can be scrubbed and cleaned regularly, latex paint is widely regarded as the best choice for most kitchen cabinets, since it offers lower levels of VOCs and is quicker to dry.
While there are many types of paint to choose from, the best paint for kitchen cabinets is typically semi-gloss, gloss or satin. Matte is not practical in kitchens and baths where you will need durable paint you can easily clean.
If you don't clean before sanding, contaminates (like cooking grease) will be pressed down into the wood. Contaminates will keep the soon be applied paint for sticking. You can remove the doors here in the process or wait until after you wash them down. It is totally up to you and situational dependent.
While priming never hurts, whether it's necessary or not is determined by the type of paint (oil or latex) currently on your cabinets and the type you plan to use for repainting. If you're changing the type of paint or painting over natural wood cabinets, then it's important to prime the cabinets first.
DecoArt Satin Enamel Cabinet Paint
In the past, if you wanted to paint cabinets or furniture, you had to strip, sand and generally kill yourself getting a good surface ready to paint on. Now, with DecoArt's Satin Enamel paints, you don't need to do any of that.
It is generally not recommended to paint over varnished wood, but you can paint over it without sanding it. If you want to protect the surface permanently, you can use Chalk paint and seal it with a top coat. Or, you can use a special bonding primer to prepare the surface for painting without sanding it first.
Ideally, spray painting cabinets is the most sought after method today. The quality of finish you get from using a spray gun is second to none, and it's by far a faster and more efficient method.
Note: While you don't have to sand before you prime, you do need to sand lightly after you prime and between each coat of paint. Yeah, it will take a while (probably about an hour and a half for a standard-sized kitchen), but it's necessary to make sure the next coat goes on well.
Is Cabinet Paint Different From Wall Paint? Oil-based paint and latex-based paint differ primarily in the final texture and drying time of kitchen cabinets. Additionally, latex paint with a low or no VOC will have a significantly less offensive odor as it cures, so you won't have to worry about it.
The two primary differences between oil-based paint and latex-based paint on kitchen cabinets are final texture and dry time. Oil-based is more traditional and popular with purists who like the “painterly” look of brush marks, while latex gives a more consistent finish.
Rollers are not as consistent. The paint is applied unevenly. So, if you want a factory-grade finish, choose to spray your kitchen cabinets instead of rolling them. In addition to providing a higher-quality final finish, spray painting is faster than using a roller.
Two coats of paint are essential for cabinets—you're building a surface. By the way, to get the nicest finish, use a brush, a 2- to 2 1/2-inch fine bristle brush. Whatever paint you use, ventilate the room—direct a fan out the window—and wear the masks they sell in paint stores.
Cabinet refacing is the process of replacing cabinet skin panels to give your kitchen a dramatic new look. Your cabinets may be scratched or cracked, or you may simply desire a change — much like replacing a perfectly good smartphone with the latest model.
If your cabinets are stained, apply at least two coats of quality primer. For me, there's nothing better than BIN, Zinsser's shellac-based pigmented primer. It dries fast and flat, without brush marks (unlike most oil-based primers). You can buy it at home and hardware stores, as well as online (view on Amazon).
Painted cabinets should get a thorough sanding with 120-grit paper, but no matter the finish, do a final pass with 220-grit. Use a sanding sponge to dig into any tough areas that need special attention or corners that are hard to get with your sander. Check on wood filler repairs and sand those areas to match.
Using a paint sprayer is one of the easiest ways to get a super smooth finish on your cabinets. By their very nature, paint sprayers eliminate brush strokes and roller marks completely. And painting with a paint sprayer is almost always faster than using a paint roller and paint brush.
Magnolia Home by Joanna Gaines Trim, Door + Cabinetry Interior Paint is a water-based acrylic product designed for surfaces such as kitchen and bathroom cabinets, trim, window frames and doors. It offers the hardness of a traditional oil-based paint in an acrylic formula.
While satin finishes tend to be fairly durable in high traffic areas, they're not as durable and versatile as semi-gloss against mildew and mold. Kitchen cabinets in high moisture environments can, therefore, do better with semi-gloss paints.
Doors typically require a good amount of time, because you need to paint both sides and let them fully dry in between coats. You can begin with the back side of your cabinet doors. Apply one coat, wait 24 hours and then move on to your second coat of paint.
Laminate doesn't play well with all primers and paints, only those specially formulated to adhere to its picky surface. If you opt for a primer, choose a bonding primer tenacious enough to stick to laminate (view example on Amazon), and then top it with an oil- or latex-based paint after the primer has cured.