A: We do not recommend mixing any Pine-Sol® product with other cleaning products or chemicals. Mixing cleaners can result in the release of hazardous gases.
Pine-Sol is generally safe to mix with most laundry detergent, but be cautious with detergents containing bleach or ammonia, as Vuong says this can create harmful fumes (or simply reduce the effectiveness of both products).
First, make sure to keep it away from children's reach. Second, avoid using it as a cosmetic product and handle it with care at all times. This usually means wearing a mask and gloves when using it. Finally, do NOT mix Borax with any boric acid products, such as pesticides.
Mix 1/4 cup of Pine-Sol® Multi-Surface Cleaner with one gallon of warm water. Mop your floor with the mixture.
Clean your floors
Borax removes dirt and stain from tile, linoleum, and wood floors, says Syren. Adding it to your floor cleaning solution will soften water and improve cleaning power. How to do it: Fill a mop bucket with warm water. Add 2 tablespoons of borax, 1 tablespoon of Castile soap and 4 tablespoons of vinegar.
Some of the insects that borax kills include ants, flies, and other insect larvae. Borax is an ant poison, and it controls flies around manure piles. It also prevents larvae from growing. The main insect borax kills are termites.
This amazing, natural mineral found in every corner around the globe is a multipurpose cleaner that can be used to tackle just about anything, from tough laundry stains and odors to dirty carpets and water spots on glassware.
No rinsing required, except on rubber or asphalt tile. For extra tough jobs, use full strength and rinse immediately. For painted surfaces, test a small area first. Not recommended for use on unfinished, unsealed, unpainted, waxed, oiled or worn flooring.
A: You can use Pine-Sol® cleaners on hard, nonporous surfaces, including floors, sinks, counters, stoves, bathtubs, shower stalls, tile, toilets, garbage cans and diaper pails. For tough jobs, use full strength and rinse immediately. On wood surfaces, do not allow puddles of product to remain.
Create a fly and wasp repellent.
Upstairs Downstairs Cleaning says that you can use full-strength Pine-Sol as an insecticide or a 4:1 Pine-Sol to water solution spray for staving off wasps and other stinging insects—just steer clear of honeybees!
While the National Library of Medicine (NLM) classifies borax as being noncarcinogenic, it does pose some risks, including: skin, eye, and respiratory irritation. digestive problems. infertility.
Borax has long been recognized for its disinfectant and deodorizing properties. Mix a 1/2 cup of Borax into 1 gallon of hot water or undiluted vinegar and clean with this solution. For a fragrant smell, add a few sprigs of fresh thyme, rosemary or lavender to the above recipe.
Make a stain-removing cleaning paste
Mix 1 cup of borax and ¼ cup of lemon juice until a paste forms. Use this to get rid of clean stained sinks and countertops.
The recall covers 37 million bottles of eight different types of Pine-Sol, which may contain a bacterial called Pseudomonas aeruginosa, according to the U.S. Consumer Product Safety Commission (CPSC).
Flies tend to dislike the smell of Pine Sol, citronella, peppermint oil, and clove oil. You will find that many DIY bug spray recipes use these ingredients in some way. What is this? You will notice that these are all strong and distinct scents that are repulsive for flies, but rather pleasant for people!
Some experts suspect that the problematic component within Pine-Sol (and the reason its warning label recommends not mixing it with bleach) could be glycolic acid. When blended with products that contain glycolic acid, bleach begins a chemical reaction, which releases hazardous chlorine gas.
Your Cleaner/Water Ratio Is Off
Too much water means that the cleaner won't penetrate and cleanse the dirty floors like it's meant to. On the other hand, if you use too little water and a higher concentration of cleaner, the cleansing materials will stay on top of your wood floors after they've dried.
Sticky floors happen when you have not passed the mop to remove too much cleaning solution or the wrong cleaning solution. It can also be due to dirty water used in rinsing your mop.
Pine-Sol Multi-Surface Cleaner – Yes, Pine Sol on vinyl floors is a fine option; however, use sparingly with water. Do not oversaturate your vinyl floors with too much water, use just enough to disinfect the floors.
Benefits of Using Pine-Sol®:
Pine-Sol® Multi-Surface Cleaner is an EPA-registered disinfectant that kills germs and bacteria (Salmonella choleraesuiius and Staphylococcus aureus). So you can trust that it'll do a whole lot more than simply brighten floors. Use on a wide variety of hard, nonporous surfaces.
1. Toilet Cleaning. Sprinkle 1/2 cup of Borax and ½ cup of white vinegar into your toilet bowl, ensuring you reach all areas (including under the rim). Leave for at least 8 hours (or overnight) then scrub thoroughly with a brush before flushing.
Instead of sprinkling borax in the bottom of your trash can, try baking soda or used (or fresh) coffee grinds, which all work wonders. You can also use baking soda and water to clean your trash can. Throw in some vinegar for extra odor-fighting action.
Both baking soda and Borax are effective because they are alkaline and abrasive. But Borax has a higher PH than baking soda, making it a slightly harsher but arguably more effective cleaning agent.