If your pool has been green all season you're probably super excited to close it. While it seems like the easiest option – it's not! It's much smarter to close your pool as clean as possible. Algae can grow in water as cold as 50 degrees.
In the long run, closing a pool green or filled with debris will create more work and could permanently stain or damage surfaces. Protect your pool with clean and balanced pool water, a winter kit, and a strong pool cover!
Cleaning your pool before closing for the winter prevents algae and makes your spring opening even easier. Make sure to thoroughly brush the sides and floor, skim the surface and clean out the skimmer and pump baskets after vacuuming the pool.
Use Winter Algaecide
Some winter algaecides last up to three months. You should pour in the algaecide on the last day you use the pool for the season and let the pump run for 24 hours. After that, you can shut down your pool's circulation system for the winter.
Keep it covered.
Covering the pool is a good way to prevent algae growth. The right cover keeps algae from entering the pool, but it also keeps leaves, bugs, bacteria, and dirt from decomposing in the pool, providing algae with food.
When the levels are properly balanced, chlorine will keep the algae at bay, but the water will slowly begin to turn green as the algae take over if there's not enough. But be careful—adding too much chlorine in pool water can cause those metals to oxidize and turn the pool a different shade of green.
Shocking your pool is easy: Use a shock treatment to bring your 10 to 12 PPM. Then, wait a day or two for the chlorine to come down to its normal level, about 1.5 to 3.5 PPM. Pro tip: For best results, shock your pool a few days before you plan to shut it down.
However, when you return to your pool as the weather gets warmer, you might find that your pool water has, worryingly, turned an unsightly green colour. If this is the case — don't worry. A green pool is a normal occurrence and can be cleaned relatively easily.
By simply adding algaecide to your water prior to closing, you can prevent algae growth from occurring during the cold, winter months which makes for an easier opening in the spring. You can apply algaecide directly to the pool water and allow the pump to continue to circulate for approximately two to four hours.
Closing a pool with leaves or acorns in the bottom will likely lead to a stained pool bottom. Winterizing the Equipment and Piping-It is imperative that the equipment be properly winterized. Failing to winterize the pump and filter will likely lead to freeze damage resulting in costly repairs.
The only thing that kills algae is CHLORINE (or your sanitizing product, or one of the copper-based algaecides on the market). You need to raise the level of your chlorine – shock the pool – and maintain that high level until all the algae is dead. This may take 3 to 4 days. RUN THE FILTER 24 HOURS A DAY.
Algae is often a problem for backyard pool owners. With regular maintenance, chlorinating compounds stop blooms. However, when untreated, it can cause minor damage to a pool and pool equipment as well as be a danger sign to swimmers and those who frequent the pool.
Pools can immediately turn green after shocking when they have metals like copper in the water. These metals oxidise when exposed to high levels of chlorine which makes the pool water turn green. Adding a metal control product such as Zodiac Metal Remover will help to restore the pool water.
A late September or October closing is a great way to set up for success in the spring. If you are already suffering from an algae bloom; take care of that before you close. Opening your pool early in the spring is a good idea if you want clear water.
Algaecide should be used after each shock treatment, so it has a better chance to support your chlorine as it works its magic. Be sure to shock your pool first, then when the chlorine levels of your pool return to normal, add the correct amount of algaecide to several places around your pool while your pump is running.
So if the pool water isn't cloudy and the 'dirt' is clinging to the walls after brushing, the problem is likely be yellow/mustard algae. Yellow/ Mustard algae is very resistant to even high chlorine levels and will grow and thrive in a chemically well-balanced pool.
The use of baking soda in pools can spot treat algae
No one ever wants to see algae build up in their swimming pool. It can turn any backyard pool murky green or cause unsightly black spots on the walls and floor of any swimming pool.
In sunny areas, a dark cover will provide some additional heat. When used the right way, a black tarp can help with pool heating. For example, when using the black hose trick, you can lay your black hoses on a black tarp. This can help generate more heat.