Cleaning toilet jets with delimer One of the best rated delimer is CLR. However, as delimers are extremely strong acid blends, you will need to put on your protective gears (for the same reasons as when working with Muriatic acid). Put on rubber gloves, respirator, eye goggles and full-coverage clothing.
Cleaning the jets can be accomplished by using a calcium and lime removing solution like CLR or a home made solution of baking soda and vinegar.
Use a solution of one part bleach to ten parts water. Let it sit about five minutes in the overflow tube, then flush the toilet. Then put on some gloves and use a piece of wire to clean out each jet. When all the jets are clean, scrub around them with a bleach-compatible cleaner.
CLR is corrosive. Avoid contact with wood, clothing, wallpaper and carpeting. Some laminated surfaces (counter tops) are coated with a synthetic surface which may be affected by rust removers; clean spills immediately.
Can I Leave CLR In My Toilet Overnight? No, you should not leave CLR in toilets overnight.
For toilet rim jets, vinegar can be a great cleaner, since it both disinfects bacteria, kills mold, and breaks down mineral deposits.
Fill the tub with hot water a few inches above the jets. Depending on the tub size, add anywhere from 2 tablespoons to 1/4 cup of mild dish detergent. Once the detergent dissolves, add 2 cups of distilled white vinegar. Close the valves (if allowed by the manufacturer) and run the jets for 15 minutes.
Use vinegar or another acidic cleaner to clean calcium buildup from your toilet. The acid will break down the mineral deposits so you can brush them away. Be sure to take the necessary safety precautions when working with cleaners. Wear gloves and eyewear and open windows for ventilation.
What Creates Black Rings Inside a Toilet Bowl? Hard Water Deposits: Anytime a surface comes in contact with your home's water supply on a regular basis such as faucets, shower heads, and toilet bowls, it becomes susceptible to an accumulation of residue.
Muriatic acid, which is also called hydrochloric acid, is some pretty heavy-duty stuff. It's a good CLR alternative, and it can clean up rust and limescale super fast - but you've got to be really careful with it because it's seriously corrosive.
We recommend using a mixture of ¼ cup of vinegar for every 1 cup of water. This ensures your toilet tank is being disinfected without causing damage, which the use of bleach or chemical cleaners can do.
just empty the bowl, pour 32oz into the refill/overflow tube using a funnel, and let it sit 12-24hr, longer the better. the acid wont hurt anything in the bowl.
Bottom Line
The main difference between CLR and vinegar is that CLR is stronger and better at removing mineral build ups like limescale. Vinegar is better at cleaning rust. It's also cheaper, versatile and safer than CLR.
Customers say the Zep Calcium, Lime, and Rust Stain Remover is an effective and cost-efficient alternative to more expensive brands like CLR. Many users appreciate its ability to tackle tough stains, particularly in toilets and on various surfaces affected by hard water.
While it can be put to a number of helpful uses around the home, WD 40 is particularly good at softening rust and limescale deposits in the toilet (and bathroom). All you have to do is spray it on the desired section of the toilet, wait a few minutes, then scrub it away with a toilet brush.
The acidic values of vinegar allow it to soften limescale and prepare it for scrubbing clean. Pour undiluted white vinegar into your toilet bowl, making sure you get it up under the rim where limescale often gathers and cover every part of the surface. Leave it for three to four hours and then scrub it with a brush.
The best way to completely clear the rim jets is to plug each jet with plumbers putty, pour acidic toilet cleaner into the overflow tube located in the toilet tank, and let the acidic cleaner sit for a while and dissolve the build-up and deposits. After a few hours, remove the plumbers putty and flush several times.
In extreme cases, the calcium deposits can clog the tiny water jets under the toilet rim, resulting in inefficient flushes. Vinegar or other acidic cleaners are an effective way to remove calcium buildup in your toilet. The acid content breaks down the accumulated minerals, making it easier to remove them.