Luckily, above ground pools can have both shallow and deep ends, just like an in-ground pool. Another pool option that is gaining popularity is the semi in-ground pool design.
Above-Ground pools are available in a variety of sizes, in Round and Oval shapes. Depths range from 48" to 54".
Many pool owners, who want the experience of deeper water, opt for a dish-type dig in the center of the pool. The standard vinyl liner will typically allow for an added depth of 3-4 inches using this procedure. However, an "expandable" liner can be obtained which will accommodate a pool depth of up to six feet.
The vast majority of pools that are called “semi-inground” are just above ground swimming pools that can go partially in the ground. In truth, ALL metal walled above ground pools can go halfway in the ground. Semi-inground is a term above ground pool retailers use for people looking to put a pool in the ground some.
For residential pools, the standard maximum depth of an inground pool is usually 8 feet. But pool builders can build deeper pools. If you plan to install a diving board, 8 feet is the minimum depth you will need in the deep end. This depth is deep enough for diving in safely with a diving board.
The depth and length of the swimming pool should be 5 feet and 25 feet if you want to have swim laps in it. Most people are satisfied with the standard depths of 3-5 feet in a pool with multiple depths but it cannot be a right decision if you and your spouse's height are not suitable to those pool depths.
Most “fun” pools should have a minimum depth of three feet to accommodate for both adults and children, and a maximum depth of four to five feet, for safety. Swimmers who swim laps seriously should look for a minimum depth of five feet, and a length of 25 meters.
The short answer is yes, but the longer answer involves several conditions. Not just any pool can be buried, and not just in any area, and not just to any shape or depth. First, you need to make sure your above ground pool is built to be buried, as not all are.
The short answer is that “Yes, they can!” However, there are some things that should be taken into account if you're going to go down this route. This article will go over some of the basics of sinking an above ground pool into the ground.
Dependent upon pool shape and size, depth ranges available are from approximately a 36" shallow end to an 8' deep end. The pool wall, equipment and materials are like that of an inground pool but competitively priced like a higher end above ground pool.
The pool company will drain your pool to adjust the depth. To make a pool shallower or deeper, workers will first remove the bottom either with machinery or by hand. Then, they'll add or remove fill to reach the desired depth. A new bottom will replace the old one and will be made to match perfectly.
STANDARD SYLES SEMI-INGROUND
Like all our Semi-Inground pools this has a flat bottom, but you may option a deep end although you must also upgrade the liner to a 30G. All the standard styles come in 2 panel heights either 48” or 52”.
EXPANDABLE POOL LINER DESCRIPTION: A pool liner that stretches to fit a “deep end” or dugout area of an above ground pool.
You may be thinking above ground pools cannot be that deep, but they can actually go as far down as 8 feet or more! This is due to the elasticity of the vinyl liners. The vinyl liner can accommodate a space that may not be shaped exactly like a perfect pool. When installing, make sure it is over a gradual slope.
Sizes And Shapes Of Above Ground Swimming Pools
Round pools can get up to 33 feet in diameter with the smallest ones around 12 feet. Oval pools come in a wider range of sizes and styles with some of the biggest ones reaching about 40 feet in length and about 20 feet in width.
Installing a deck around your above-ground pool is a fairly straightforward way to make your pool more accessible and more enjoyable. Whether you build a deck all the way around your above-ground pool or just along one side, the extra space will give you and your guests a place to sunbathe and hang out at water level.
Do not attempt to install an above-ground pool below ground where all sides of the pool are surrounded by dirt. The weight of the soil when it becomes saturated with water will cause the walls to collapse. Professional excavation is recommended if more than a few inches of slope must be removed for the pool to fit.
What is a Recessed Pool? Recessed Pools, also known as below-grade pools are above ground style prebuilt pool shells that are designed to function as an inground pool. They offer many advantages similar to an inground pool at the fraction of the cost.
Can A Saltwater Pool Be Used on an Above Ground Pool? If you're wondering if a saltwater generator can be used for an above ground pool, the answer is- absolutely! Many people have above ground saltwater pools, especially as salt water pools slowly become the norm.
We recommend a depth of 4-6ft. Another good option for swimming laps is to opt for an L shaped pool, with a shallower area on the shorter side and a depth of between 4-6ft on the longer side.
To begin with, the maximum depth for pools is typically 8 feet, although we can build deeper pools. The pros of having a pool of this depth begin with the fact that this would allow you to install a diving board.
Diving Safety Recommendations:
The American Red Cross recommends a minimum of 9 feet of water depth for head first dives including dives from pool decks.
Slides must be installed over a water depth of at least 36 inches, dropping to 42-54 inches as you move away from the slide. This generally means the middle of a pool, neither the shallow end nor all the way in the deep end. Too shallow and a slider can hit the bottom of the pool which is dangerous.