Some electric fireboxes actually come with a reduced heat output, in order to minimize the wattage on the unit, so that it may be plugged into the same circuit as your TV, without overloading the circuit.
What is the recommended distance between my TV and an electric fireplace? A recommended distance between your TV and electric fire is between 8-10 inches, however many experts within both the world of fires and TVs say that getting closer to 12 inches is ideal.
Most electric fireplaces do not require a dedicated circuit, but it's recommended for safety and consistent performance. These units typically operate between 750 and 1,500 watts, which can be safely used on shared circuits if the total load doesn't exceed the circuit's capacity.
When you're ready to purchase a new fireplace and want to learn about its electricity draw, you may be asking, “How many amps does an electric fireplace use?” With a 1,500-watt heater, most electric fireplaces have 13 amps and can be plugged into a standard 120-volt outlet, also known as a 15-amp circuit, without ...
Electrical fireplaces are perfect to sit below a wall mounted TV, as they are considerably less hot (and temperamental!) than a standard wood-burning fireplace.
A heat shield is a protective barrier that is placed between your TV and the fireplace to reduce the amount of heat that reaches your TV. It is typically made of materials such as metal or glass and can be mounted to the wall or attached to the TV itself.
Lack of Authentic Experience
For many, the biggest drawback of an electric fireplace is its inability to replicate the authentic experience of a wood-burning fireplace. The distinct sound of crackling wood and the characteristic smell of burning logs are conspicuously absent in electric models.
You can plug your electric fire into any regular socket in your house, so long as it is the correct voltage. However, you need to make sure you don't cover any power sockets up with your fireplace.
The average TV typically draws around 0.3 to 1.7 amps of current. The amp draw of the TV can vary based on factors such as the TV's efficiency, screen size, technology (LED/LCD, OLED, QLED), and additional features like smart capabilities and built-in sound systems.
Most electric fireplaces require between 1,500 to 2,000 watts of power. This translates to about 12.5 to 16.7 amps on a standard 120-volt electrical circuit. It's crucial to use the correct voltage for optimal performance and safety. Using the right wattage keeps your fireplace running smoothly, an expert says.
Your electric fireplace should be plugged directly into a standard home outlet.
The average total cost to operate the flame and heater is approximately 8¢ per hour (when the heater cycles at 50%). These amounts can fluctuate depending on the electricity rates in your specific area. Compared to a gas fireplace, which can only be used with the heat-activated, gas often runs at 17¢ per hour.
Some fireplaces can simply be plugged into an outlet, while others require hardwiring. If your fireplace needs to be hardwired or you need to install a new outlet closer to the fireplace, consider hiring an electrician.
Is it safe to put a TV above an electric fireplace? The answer is yes. These fireplaces won't produce the intense heat that a wood-burning or gas fireplace will. That means that your TV and other electronics will be safe from damage.
An electric fireplace can be left on for an indefinite period of time. However, with the heating element on 24/7, you will notice a difference in your electric bill. That being said, many people leave their electric fireplace operating for extended periods of time, with the heat turned off.
Sufficient for Most Areas: In standard living spaces, 15-amp outlets are more than enough for everyday electronics, including televisions, lamps, and computers.
Home Electronics — For a typical TV and audio set up, 15 amps would be fine, but if you have some high load accessories, a 20 amp model may be needed (20 amp receptacle/wiring required).
The short answer is we don't recommend it. Electric fireplaces typically require a substantial amount of electricity to operate, and they may draw more power than a standard extension cord can handle. Using an extension cord that cannot handle the load can lead to overheating and potential fire hazards.
Yes, most electric fireplaces operate on 110/120V electric current and use approximately 1500 Watts per hour, at full power. Your utility charges you based our your Kilowatt usage per hour (kw/h). Multiply your cost per Kilowatt-hour by 1.5 to determine the maximum cost per hour to operate your electric fireplace.
Optimal Locations for Electrical Outlets
Position an electrical outlet directly behind the electric fireplace unit. This will hide cords and keep them out of sight for a clean look. It also minimizes tripping hazards, making the area safer.
In an electric fireplace, all the electricity used goes directly into heating the room, meaning virtually no energy is wasted. Moreover, the heat generated by electric fireplaces is distributed more evenly throughout the room.
While electric fireplaces are extremely safe, leaving them on overnight (or any time they will not be attended) is not recommended. But electric fireplaces from ClassicFlame® have a number of built-in safety features to help protect you and your home, no matter the situation. For example, many models come with a timer.