Deadbolts, however, are still vulnerable to lock picking. Pin and tumbler locks are the most common designs in use today. These locks use a series of small, spring-loaded pins to keep the cylinder from turning.
Lock picking is the first and best method to unlock a deadbolt without a key. It is a popular choice for those who want to avoid damaging their door or lock. Lock picking is an easy skill to learn—the basics required to pick a standard pin tumbler deadbolt can be cultivated within 10 minutes.
It's quite easy to pick a deadbolt lock. In fact, you would want to replace all your key locks with electronic ones when you discover how simple it is. This doesn't mean that picking a deadbolt lock does not require skills or practice – it still does – but the technique is so easy that anybody can learn it.
1) EVVA MCS
Each key has a complex rounded shape, this coupled with the magnetic element makes it an extremely hard lock to pick. The only way to gain access to the door would be for the key to be cloned, and in that case, a master locksmith would need to get their hands on the original key.
The magnet doesn't make the lock move: Every lock will work differently, but it's typically friction that causes this problem. If a piece of your lock is supposed to move, be sure it can move easily. If it's attached too tightly, your magnet may not be able to move it.
Unfortunately, you can not unlock a deadbolt with a credit card. Credit cards will only work with slanted-latch-style locks. Furthermore, the slant of the latch must be facing you so that you may press it in using your card.
Abloy Protec2 PL 330 Padlock
It is one of the only locks in the world that has never been picked. It has a hardened boron alloy steel shackle to provide resistance to bolt cutters (but is not bolt cutter proof). The padlock body is brass and the shackle and body are chrome plated, so it is very rust-resistant.
It is all depending on the deadbolt that you have. If it is a standard lock they can usually just pick it or bump key it. But if it a security lock then the only way that they are able to open it is to drill the lock.
Even though it may take some time to pick a deadbolt, many burglars are well equipped to handle it with ease. Choose a lock that has a high security cylinder if possible. These locks will have a special pin inside of them, which cannot be picked using a standard tool.
It can take anywhere from 7 seconds to 45 minutes for a locksmith to pick open a lock. Generally a locksmith should be able to unlock most doors in about 10 minutes. Of course this is effected by the type of lock.
Up to 30x's stronger than standard deadbolts
Ultimate Lock has the ability to withstand up to 4000 pounds of force, to put things in perspective, most deadbolts can only withstand roughly 100-200 pounds of force.
Locksmiths typically charge $50–$75 per hour, or they charge per lock with a flat fee for the visit. A locksmithing job may cost as little as $50 or as much as $400 depending on the following factors. Emergencies: You'll pay extra for service at night or on weekends.
Having a deadbolt on the entrance to your home will take a standard door knob lock to the next level. Forced entry is involved in 55.7 percent of burglaries, and a deadbolt will make breaking down a door remarkably more challenging.
Learning how to pick a lock with a hairpin can be a fun challenge, but sadly it doesn't always work. Bobby pins are bulky, and some locks have slimmer keyways that are too small for a bobby pin to enter. So if you really want to learn lockpicking, I would highly suggest considering a basic lock picking set.
CR's take: The Medeco Maxum 11TR503-19 is the strongest deadbolt across all of our lock categories. It's top-notch for drilling, withstands kick-ins very well, and is designed in a way that makes it quite difficult to pick.
Generally, all you'll need to pick a lock are some picks (long, thin metal pieces with curved ends of different shapes for different types of locks) and a tension wrench.
On a badly designed deadbolt on a door with bad fitment which exposes the plunger, you COULD walk the bolt in by using the tip of the knife (hopefully slightly harder than the bolt) to push or “walk” the bolt back into the door. It won't work at all on a correctly installed deadlatch doorknob either.
Unfortunately, 100% pick proof locks don't exist unless you have a keyless lock. Pick proof locks are actually just more resistant to lock picking and bumping as they have an extra set of tumblers which then gives the key effectively two jobs to do.
Single cylinder
This is the most common type of deadbolt used. Single cylinder deadbolts have an exterior keyhole that throws or retracts the deadbolt using a key on the outside. On the inside, you can lock and unlock the deadbolt with the thumbturn.
Some pin-tumbler locks have modified pins that make picking more difficult. In the most common variation, the upper pins have a mushroom-shaped head. This odd shape causes the plug to shift early, before you have actually pushed the top pin all the way up. This makes it more difficult to put the pins in position.
Picking a lock with paper clips works pretty much the same way as picking a lock with a traditional tension wrench and rake. You just need to turn two paper clips into those two very same tools, and then pick the lock with them like you'd normally do.
Signs of a tampered lock can be difficult to detect and often go unnoticed until it's too late. Signs vary from visible dents and scuff marks around the keyhole, scratches around the door handle, or even missing hardware from inside the door frame.