Benefits of magnetic locks For example, magnetic locks work well on interior doors where security isn't a huge concern if the power goes out and the door unlocks. The benefits of magnetic locks include: Strength. The average magnetic lock can withstand up to 1200 pounds of force.
Strongest: vertical and double cylinder deadbolt locks
However, you can greatly reduce the likelihood of intruders by making sure that all exterior doors are fitted with some form of deadbolt locks and strike plates and that you are diligent in using these locks while at home and away.
Maglocks require constant power to stay locked, making them fail-safe. If the power goes out for any reason, the maglock's magnetic hold will release and the opening will no longer be secured. On the other hand, fail-secure locking functions require power to unlock a door.
Magnetic or mag locks are durable, reliable and low maintenance. It's important to also consider the nature of the door in the event of an emergency.
Magnetic door locks offer a range of benefits, including enhanced security and durability, but they also come with certain drawbacks, such as power dependency and installation complexity.
Misalignment of the Lock
Another common problem with maglocks is misalignment, which can cause the lock to bind or not release properly. This can be caused by a poorly installed door frame, a misaligned strike plate, or a warped door.
Any magnetic lock with a holding force less than 1200 lbs. should only be used for traffic control, as would a light or medium duty electric strike. A holding force of 650 lbs. (Figure 1) is typical for most magnetic locks fit for traffic control and they may be easily defeated.
Any non-magnetic material can be used to defeat a maglock, such as clear plastic, provided it is easy to over look. Clearly, red electricians tape might not go unnoticed for very long. Aluminum tape of the type used for EMI shielding would also work quite well provided adequate thickness is achieved.
Generally speaking, the cost to install a maglock on an average door is approximately $300. Nonetheless, installation costs will vary based on the complexity of the installation and the installer you use.
The primary difference between electric strike locks (door strike) and magnetic locks (maglocks) is their power requirement. Maglocks are fail-safe, while electric strikes are generally fail-secure. In other words: Magnetic locks require power to lock the door, whereas electric locks require power to unlock the door.
Confirm the connections on the maglock and check the wiring for pinches or breaks. The face of the magnet and strike plate are clean. Check strike plate alignment and make sure it is making complete contact with the face of the magnet and is not misaligned up, down, left, or right, even 1/8\".
I have found three common holding-force sizes for maglocks. 600, 1200, 1500 lbs | 180, 280, 545kg. I guess it would be easy to open a datacenter door held closed with a 600lb maglock (or less).
The magnetic lock opens automatically without power.
Since Schlage locks are made of stronger materials, and provide far greater security than Kwikset locks, they also come with a higher price tag.
The Stronghold SS100CS is a testament to this heritage. Our strongest padlock to date and the first-ever padlock to achieve LPCB Level SR4 accreditation, this is the world's strongest padlock.
There are no “fail secure” magnetic locks. All magnetic locks are “fail safe” — when power is removed (fail) the lock unlocks (safe). “Fail secure” locking requires an electric strike. (Strikes are available in both fail safe and fail secure models.)
Fire Tested on FD 30/60/90/120 minute door sets
This slim-line maglock has been fire tested on both 30 minute and 60 minute timber door sets. Having achieved the necessary standard on both, the access control professional can be sure it will still perform effectively in the event of a fire.
An automatic door and magnetic lock system also constantly consumes electricity, and even when closed, standby power is used. Magnetic locks use 0.142 kWh to operate for 24 hours, meaning it can cost up to £2.5 per day to power just one door in a building.
Built to last and with virtually no maintenance requirements, they provide an effective form of access control that can be relied upon for years to come. maglocks are an incredibly reliable security measure for any commercial or residential building.
Advantages. Sturdy: Magnetic locks may also suffer less damage from multiple blows than do conventional locks. If a magnetic lock is forced open with a crowbar, it will often do little or no damage to the door or lock. There are no moving parts in an electromagnetic lock to break.
The difference is when the maglock is the only locking device on the door. If the magnet is intended to provide security to keep the door closed and keep the building secure when unoccupied, then 500kg holding force is a minimum requirement.
Maglocks can run hot due to the electricity running through them. It's that same electricity that creates the electromagnetic field used to secure doors and gates. If the maglock appears to run much hotter than you'd expect, it might be best to contact us for a free site survey.
A thicker magnet generally provides stronger pull strength, while a thinner magnet may not be able to hold as securely.